Epson PowerLite 835p User Manual page 179

If you're using Access Point mode and you're connecting to the
■
wrong network, you may be experiencing signal interference from
another network. Try resetting your access point or base station,
then restart NS Connection.
If you're using AirPort, the projector's ESSID should match the
■
AirPort network name, not the name of the AirPort base station.
To check the network name, start the AirPort Admin utility,
select your base station, and click
. The network name appears on the AirPort tab.
All Settings
If you're prompted for a password when you connect, enter the
■
WEP encryption key (if you're using WEP encryption).
Try connecting using IP Connect Mode; see page 89.
■
An image displayed with EasyMP appears distorted.
Because of their resolution, some JPEG images cannot be displayed
correctly. Some JPEG files from digital cameras cannot be previewed.
Files with a high compression ratio may appear blurry.
In EMP SlideMaker 2, PowerPoint files don't appear in the
file window.
EMP SlideMaker 2 does not support PowerPoint 95. Files created
in this version of PowerPoint must be opened and resaved in
PowerPoint 97 or later.
In EMP SlideMaker 2, your PowerPoint files don't display
thumbnails and can't be pasted into scenarios.
If you use PowerPoint 97, make sure the MS Office JPEG converter
has been installed. Run the Office 97 installer, display the
option, and install the JPEG filter. Also, make sure
and Filters
PowerPoint is installed on the computer you're using to build the
scenario.
Your PowerPoint movie file does not play back.
Movies files inside a PowerPoint file cannot be played on the scenario.
. Then click
Configure
Converts
Show
Solving Problems
179