Creating Your Own Startup Screen - Epson PowerLite 835p User Manual

Fine-Tuning the Projector
130

Creating Your Own Startup Screen

You can transfer any image from your computer or video source to the
projector and then use it as your startup screen. You can also use it as
the screen displayed when the projector is not receiving a signal or
when you press the
A/V Mute
logo, slogan, photograph, or any other image you want to use.
Capturing the Image
Start by displaying the image you want to use from either a computer
or video source, such as a DVD player or digital camera. Then follow
these steps to capture the image and transfer it to the projector:
1. Press the button on the remote control, highlight the
Menu
menu, and press
Extended
2. Highlight
User's Logo
3. When you see a message asking whether you accept the present
image as the user's logo, select
box displays over the image.
4. Use the pointer button to select the area of the image you
want to use. Then press
5. When you see the message
and press .
Enter
6. Use the arrow buttons to select a zoom rate (display size) and press
.
Enter
button. The image can be a company
.
Enter
and press .
Enter
and press
Yes Enter
.
Enter
Select this Image?
. A selection
, highlight
Yes