Using Emp Monitor; Opening And Closing Emp Monitor - Epson PowerLite 835p User Manual

When you finish changing an address in the network menu, press
the button (on the remote control) or the
Enter
button (on the projector).
5. When you're done, highlight

Using EMP Monitor

EMP Monitor lets you use a remote computer to manage your,
projectors whether connected wirelessly or over a wired network. It
lets you easily turn the projectors on or off (together or individually),
switch image sources, and check their status.
Before using EMP Monitor, make sure you've installed the software
(available for Windows only) as described on page 185. The
computer you're using to monitor the projector should already
be connected to your network.

Opening and Closing EMP Monitor

To start EMP Monitor, click
Epson Projector > EMP Monitor
If you've added the program to the Startup programs folder, then it
may already be open. If so, click the icon in the system tray on the
lower-right corner of your screen to display the EMP Monitor
window:
To close EMP Monitor, right-click the program icon shown above
and select .
Exit
and press
OK Enter
or
Start > Programs All Programs >
.
Click here to start EMP Monitor
Auto/Enter
.
note
If you want to monitor
projectors while they are in
standby mode, select
Standby Mode
Extended menu, then select
Network ON
page 134.
Managing Projectors
in the
. See
139