5. Select one of the listed
seconds for the projector to sync up after making the selection.)
The message
Not Supported
■
Make sure the correct input signal is selected in the Signal menu
(see page 121).
■
Make sure your computer's resolution doesn't exceed UXGA
(1600
×
1200) and the frequency is supported by the projector
(see page 191). If necessary, change your computer's resolution
setting as described below.
Only part of the computer image is displayed.
Press the
button on the remote control.
■
Auto
■
Make sure the image
menu. See Chapter 6 for more information.
■
Make sure your computer's resolution setting is correct. Ideally, it
should be 1024
×
If this option isn't available, select one of the other compatible
video formats listed on page 191.
■
Windows:
Right-click the desktop, select
tab, and select a different resolution.
Macintosh OS X:
■
Open
System Preferences
different resolution.
■
Macintosh OS 8.6 to 9.x:
On the Apple menu, choose
Monitors and Sound
You also may need to modify existing presentation files if you
■
created them for a different resolution. See your software
documentation for specific information.
resolutions. (Allow a few
Simulscan
is displayed.
setting is correct on the Signal
Position
768 to match the projector's native resolution.
Properties
, click
Displays
Control Panels
. Select a different resolution.
, click the
Settings
, and select a
, and click
Solving Problems
173