Using Access Point Mode - Epson PowerLite 737c User Manual

Using Access Point Mode

To use Access Point (infrastructure) mode, first adjust your projector
and wireless access point or AirPort base station settings as described
in this section.
Configuring the Projector
1. Switch the projector to EasyMP and insert the Epson 802.11G/B
card (see page 50). You see this screen:
2. To select , press the
Config
3. Highlight under Wireless LAN and press
Basic
You see the following screen:
Access point
mode
button on the remote control.
Enter
Enter
.
Presenting Through a Wireless Network
59