Starting Easymp - Epson PowerLite 835p User Manual

note
Only the Epson 802.11g
card is guaranteed to work.
Other brands may not be
compatible.
caution
Be careful to insert the card
correctly and never force the
card in; doing so may
damage it. The black end of
the card protrudes from the
slot when the card is fully
inserted.
Always remove the card
before transporting the
projector. See page 93 for
instructions.
Presenting Through a Wireless Network
60

Starting EasyMP

Before connecting to the projector, you have to switch it to EasyMP
mode. Follow these steps:
1. Turn on the remote control, as described on page 32. Point it at
the projector and press the P
2. Press the
EasyMP
as the source.
3. Insert the Epson 802.11g card in the card slot with the label
facing upward.
button.
Power
button on the remote control to select EasyMP