Using Access Point Mode - Epson PowerLite 1716 User Manual

Setting Up Network Projection
64

Using Access Point Mode

To use Access Point (infrastructure) mode, first adjust your projector
and wireless access point or AirPort base station settings as described
in this section.
Configuring the Projector
1. Press the button, then choose
Menu
2. Choose
Network Configuration
3. Choose
Wireless LAN
4. Make sure
Advanced
not, use the buttons on the remote control to highlight
, then press
Advanced
5. If your network is using 802.11a, use the
remote control to highlight
6. To enable your computer to find the projector on the network,
you need to enter the SSID name of your access point or the name
of your AirPort network in the
AirPort network may be different from that of your AirPort base
station; select your base station in the AirPort Admin utility and
click to check the name of your network.)
Configure
Network
and press
Enter
and press . You see this screen:
Enter
is selected for the Connection mode. If
to select it.
Enter
, then press
802.11a
text box. (The name of your
SSID
and press .
Enter
.
buttons on the
to select it.
Enter