Epson PowerLite 835p User Manual page 73

4. Click the
Advanced
5. Check your wireless card's or adapter's device settings.
(Depending on the type of card or adapter you're using, some of
the settings may be different than those listed here.)
Set the Network Type to
■
Set the SSID to match the name assigned to the access point
■
(which should also be the projector's ESSID).
Make sure Encryption is
■
encryption on the projector.
6. Click the
General
adapter is enabled.
7. When you're done, click
box.
tab. You see a screen like this:
Infrastructure
if you have not set up
Disabled
tab and make sure that your wireless card or
to close the wireless properties dialog
OK
.
Presenting Through a Wireless Network
73