Page 1 Epson PowerLite 835p ® ® Multimedia Projector User’ s Guide...
Page 2: Important Safety Information
Epson product. Epson is not responsible for any use of this information as applied to other products. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to...
Page 3: Table Of Contents
Contents Welcome ........9 Using Your Documentation .
Page 4 Using the Remote Control Turning On and Using the Remote Control ... . 32 Controlling the Picture and Sound....34 Projecting Images Without a Screen .
Page 5 Presenting Through a Wireless Network Starting EasyMP ........60 Configuring the Connection.
Page 6 Fine-Tuning the Projector Using the Menu System ......118 Adjusting the Image Quality......120 Adjusting the Image Size, Shape, and Position .
Page 7 Using Projector Groups ......151 Creating a Group ......151 Connecting to a Projector in a Group .
Page 8 Projector Installation ..... . . 187 Technical Specifications ....189 General.
Page 9: Welcome
802.11g or 802.11b wireless network or a wired LAN network. Ease of use The projector’s keystone correction and Quick Corner automatically correct image distortion, and Epson’s unique Wall ™ Shot function lets you project against blackboards and colored walls without loss of image color, regardless of ambient lighting.
Page 10: Using Your Documentation
Built-in help system Provides assistance for common problems. Available from the button on the projector or the remote control. See page 168 Help for details. support.epson.com Download FAQs and e-mail your questions to Epson support. ® ® Support card. Keep the folder...
Page 11: Registration And Warranty
Start Here kit for details. To register, simply fill out the registration card included in your Start Here kit and mail it to Epson. Or you can register online at http://www.epson.com/webreg. Registering also lets you receive special updates on new accessories, products, and service.
Page 12: Unpacking The Projector
To receive an S-Video signal, you’ll need an S-Video cable. One may be provided with your video equipment, or you can purchase one from Epson; see page 13. To receive a component video signal from a VCR or other video device, you’ll need a component video cable.
Page 13: Optional Accessories
(available from Epson; see below.) Older iMac a special adapter to provide a VGA output port; see your computer dealer. Optional Accessories To enhance your use of the projector, Epson provides the following optional accessories: Product Replacement lamp Air filter replacement set ATA molded hardshell case ®...
Page 14 Welcome...
Page 15: Displaying And Adjusting The Image
Displaying and Adjusting the Image hether you’re presenting from a computer or video equipment, you need to follow some basic steps to display your image on the screen. Follow the guidelines in this chapter for: Positioning the projector ■ ■ Turning the projector on and selecting the image source ■...
Page 16: Positioning The Projector
Positioning the Projector note You can mount the projector If the projector isn’t already installed in the room you’re using, you’ll on the ceiling, or place it probably want to place it on a table in front of the screen, as shown. behind a translucent screen This lets you stand in the front of the room, face the audience, and for rear projection.
Page 17 After positioning the projector, you may want to connect a Kensington ® MicroSaver anti-theft device to the lock port on the projector’s left side. You can purchase this from Epson; see “Optional Accessories” on page 13 Screen Displaying and Adjusting the Image...
Page 18: Projecting The Image
Projecting the Image Make sure your projector and other equipment are set up as described on page 45. Then follow the instructions below to start the projector and display an image. Turning On the Projector Turn on any connected computer or video equipment before starting note the projector so it can automatically detect and display the image To shut down the projector,...
Page 19 4. Press the red P button on top of the projector—or press Power the P button on the remote control. Power (If this is your first time using the remote control, make sure the batteries are installed and the remote is turned on.) The projector beeps once and the projector warms up, then an image begins to appear.
Page 20: Selecting The Image Source
Selecting the Image Source note Selecting the image source lets you switch between images input from To focus and adjust the different pieces of connected equipment (such as a computer or DVD image, see page 24. If a player). projected image fails to appear, see page 21 for help.
Page 21: The Projector And Notebook Don't Display The Same Image
Troubleshooting Display Problems Follow these guidelines if you’re having trouble displaying an image. You Can’t Project an Image If you don’t see the image you are trying to project, try the following: ■ Make sure the cables are connected correctly, as described beginning on page 45.
Page 22 ■ If you’re using Macintosh OS X: You may need to set up your system to display on the projector screen as well as the LCD screen. Follow these steps: 1. From the Apple menu, select 2. Make sure the 3.
Page 23 If you’re using OS 8.6 to OS 9.x: You may need to set up your system to display on the projector screen as well as the LCD screen. Follow these steps: 1. From the Apple menu, select Monitors Monitors and Sound. 2.
Page 24: Adjusting The Image
Adjusting the Image Once you see your image, you need to make certain adjustments: ■ ■ ■ ■ ■ If you need to fine-tune the image and/or sound, see page 117. Adjusting the Height of Your Image If the image is too low on the screen, you can use the front adjustable foot to raise it.
Page 25: Using Quick Setup
Using Quick Setup You can use the button on the projector or the remote Quick Setup control to quickly and automatically adjust the projector’s focus, zoom, and shape, as well as the Wall Shot setting. All you need to do is position your projector, then press enable Quick Setup for some of the settings you want to use;...
Page 26: Adjusting The Image Shape
Adjusting the Image Shape In most cases, you can maintain a square or rectangular image by placing the projector directly in front of the center of the screen with the base of the lens level with the bottom of the screen. Even if the projector is slightly tilted (within a range of 40°...
Page 27 Using Keystone Correction To adjust your image when it is wider on one side, do the following: ■ Look at the shapes of the icons on the projector’s four keystone buttons. Press the button whose icon is the opposite of the shape of your screen image.
Page 28: Correcting Computer Images
Correcting Computer Images If you’re connected to a computer and the image doesn’t look right, note press the You must be projecting an resets the projector’s tracking, sync, resolution, and position settings. image for this button to have any effect. The button Auto works only with computer...
Page 29: Shutting Down The Projector
Shutting Down the Projector When you’ve finished using the projector, follow the recommended procedure to shut it down. This extends the life of the lamp and protects the projector from possible overheating. 1. Turn off any equipment plugged into the projector. 2.
Page 30: Using The Direct Power On Function
Using the Direct Power ON Function The Direct Power ON function enables faster startup. It’s convenient for ceiling mounted projectors because you can simply flip a switch that is connected to the power outlet for the projector to turn it on and off.
Page 31: Using The Remote Control
Using the Remote Control presentation. All of them can be accessed using the remote control, which lets you operate the projector from anywhere in the room—up to 33 feet away. You can use the remote control to adjust the picture and sound note (page 34) or as a pointer to highlight your presentation (page 43).
Page 32: Turning On And Using The Remote Control
Turning On and Using the Remote Control The remote control has an Before using the remote, make sure batteries are installed as described on page 33, then push up on the note If a button is pressed longer Turn off the remote control before transporting or storing it; this than 60 seconds, the remote prevents the batteries from discharging if something presses against control stops operating to...
Page 33: Replacing The Batteries
Replacing the Batteries If the projector stops responding to the remote control, check the following: Make sure the remote control’s ■ page 32) is in the position. Press the light button and check to see if the buttons on the ■...
Page 34: Controlling The Picture And Sound
Controlling the Picture and Sound You can use the remote control to preview and select your picture note sources, temporarily turn off the picture and sound, freeze the action, You can use the projector’s zoom in on the picture, display a picture-in-picture image, and adjust menus to fine-tune the picture and sound quality as the volume.
Page 35: Previewing Picture Sources
Previewing Picture Sources You can display a preview image from each connected source to help you select the image source you want. 1. Press on the remote control. Preview Preview button You see the currently selected source displayed in the main window, as shown below.
Page 36: Adjusting The Image Shape
Adjusting the Image Shape Even if your projected image has no parallel sides, you can even up the sides using Quick Corner. Follow these steps: 1. Press the 2. Select the 3. From the Setting menu, select note If you are already using 4.
Page 37: Turning Off The Picture And Sound
Turning Off the Picture and Sound You can use the button on the remote control to turn off A/V Mute the image and sound and darken your screen. This feature is useful if you want to temporarily redirect your audience’s attention without the distraction of a bright screen.
Page 38: Zooming Part Of Your Image
Zooming Part of Your Image You can zoom in on a portion of the image using the on the remote control. 1. Press the 2. Use the 3. Continue pressing the 4. While the image is enlarged, you can: 5. When done, press the Displaying a Picture-in-Picture Video If you’re displaying an image from equipment connected to note...
Page 39: Controlling The Volume
Displaying the Picture-in-Picture Image Make sure your main image source is displayed, then follow these steps to display and use the picture-in-picture window: 1. Press the button on the remote control. PinP 2. Use the pointer button to reposition the video window. 3.
Page 40: Projecting Images Without A Screen
Projecting Images Without a Screen Even if you don’t have a screen, you can project images onto surfaces like blackboards and colored walls without loss of image color. Your projector has a sensor that measures the conditions of the projection surface and automatically adjusts the colors and shading of your note image.
Page 41: Adjusting Color Corrections For A New Surface
Adjusting Color Corrections for a New Surface Adjust the correction values if you’re projecting on a new surface or in a new location. 1. Press the button on the remote control or projector Wall Shot while you’re projecting an image. Make sure Wall Shot is on. 2.
Page 42 ■ ■ ■ Using the Remote Control Use the pointer button to move the cursor on the screen. Press the button once to left-click, or press it twice to Enter double-click. Press the button to right-click. To drag-and-drop, hold down the second until it lights.
Page 43: Highlighting Your Presentation
Highlighting Your Presentation You can display a pointer to call out something on the screen, or draw straight or curved lines to emphasize particular points. There are three pointer tools you can choose from and each one can be customized for a different look.
Page 44: Customizing The Pointer Tools
Customizing the Pointer Tools You can customize the shape and size of each of the three pointer tools, and set how fast you can move the pointer across the screen. 1. Press the 2. Highlight 3. To change the size of the pointer, highlight 4.
Page 45: Connecting To Computers, Cameras, And Other Equipment
Connecting to Computers, Cameras, and Other Equipment his chapter tells you how to connect the projector to a notebook or desktop computer, and/or to video equipment, such as a VCR or DVD player. You can also connect the projector to a digital camera, video camera, external speakers, and/or an external monitor.
Page 46: Connecting To A Computer
Macintosh desktop adapter, as shown on page 48 (available from Epson; see page 13). Connecting to Computers, Cameras, and Other Equipment ® and hand-held devices. You can connect up to two ports (standard VGA cable connection), see connect a USB cable so you can use the remote control as a mouse;...
Page 47: Connecting To The Computer Ports
Connecting to the Computer Ports You can connect to either Computer/Component VGA computer cable that came with the projector (the monitor port on your computer must be a mini D-sub 15-pin port). 1. If you’re using the VGA computer cable, connect one end to one of the projector’s Computer/Component end to your computer’s monitor port.
Page 48: Using The Macintosh Desktop Adapter
If so, you’ll need to use the Macintosh desktop adapter to connect the VGA cable to your computer. This is available from Epson (see page 13). 1. To use the adapter, remove its cover as shown and set its DIP 2.
Page 49: Connecting The Cable For Remote Mouse Control
Connecting the Cable for Remote Mouse Control If you’ve connected a computer as described in this chapter, you can use the projector’s remote control as a wireless mouse. This lets you control your computer and click through slideshow-style presentations, such as PowerPoint, from up to 33 feet away. The wireless mouse function is supported on systems with a USB port running Windows XP, 98, Me, or 2000, or Macintosh OS X 10.2.x to 10.3.x or OS 8.6 to OS 9.x.
Page 50: Connecting An External Monitor
Connecting an External Monitor If you want to monitor your presentation close-up (on a monitor placed beside the projector) as well as on the screen, you can connect an external monitor. To attach an external monitor, connect it to the projector’s Follow these guidelines to view images on the monitor: ■...
Page 51: Connecting To Video Equipment
Connecting to Video Equipment You can connect up to four video sources to the projector at the same time. Before starting, look at your video equipment to determine its available video output connections: ■ If your video player has a yellow RCA-style video output connector, see “Connecting a Composite Video Source”...
Page 52: Connecting A Composite Video Source
Connecting a Composite Video Source 1. Locate the RCA-style video cable provided with the projector. 2. Connect the cable to the yellow video output connector on your 3. If you want to play sound through the projector, see page 57 for 4.
Page 53: Connecting An S-Video Source
Connecting an S-Video Source 1. Locate an S-Video cable (one is usually provided with your video equipment or you can purchase one from Epson; see page 12). 2. Connect the cable to the S-Video connector on your player and connector on the projector: S-Video 3.
Page 54: Connecting A Component Video Source
Connecting a Component Video Source 1. Locate a component-to-VGA video cable. 2. Connect the cable to your player and one of the note Be sure your video player is not an RGB video source. If you select the wrong source, image quality may suffer.
Page 55: Connecting An Rgb Video Source
Connecting an RGB Video Source 1. Locate the VGA computer cable provided with the projector. 2. Connect the cable to the video port on your player and one of Computer/Component 3. If you want to play sound through the projector, see page 57 for instructions on connecting an audio cable.
Page 56: Connecting To A Digital Camera Or Other Device
You can connect your digital camera, USB flash memory drive, USB Use a cable less than 10 feet hard drive, or digital photo storage device, such as the Epson P-1000, long and connect the camera to the projector using the USB cable specified for your device. Then directly to the projector.
Page 57: Playing Sound Through The Projector
Playing Sound Through the Projector You can play sound through the projector’s speaker system or attach an external speaker system. Attaching speakers to the projector instead of directly to the audio source lets you use the projector’s remote control to adjust the sound. Connecting Audio Equipment to the Projector To play sound through the projector, follow these steps: 1.
Page 58: Connecting External Speakers
Connecting External Speakers To connect speakers to the projector, follow these steps: 1. Locate the appropriate cable to connect your speakers. 2. Connect the stereo mini-jack end of the audio cable to the 3. Connect the other end(s) of the cable to your speakers. The projector’s internal speaker system is disabled while sound is output to external speakers.
Page 59: Presenting Through A Wireless Network
Presenting Through a Wireless Network his chapter tells you how to send pictures to the projector through a wireless network. Using EMP NS Connection, you can project images shown on your computer screen—including text and graphics—directly to your audience. Because images are displayed in real-time, any changes you make on your PC or notebook are automatically mirrored on the screen.
Page 60: Starting Easymp
1. Turn on the remote control, as described on page 32. Point it at Other brands may not be compatible. 2. Press the 3. Insert the Epson 802.11g card in the card slot with the label caution Be careful to insert the card correctly and never force the card in;...
Page 61 Once the card is inserted, you see one of these screens, depending on the currently selected mode: Access Point mode 4. If you’ve already set up your computer and projector for the mode you want to use—Ad Hoc mode (also called computer-to-computer mode) or Access Point mode (also called infrastructure mode)—skip to “Projecting Wirelessly”...
Page 62: Configuring The Connection
11MB/sec. Configuring the Projector This is a standard 1. Switch the projector to EasyMP mode and insert the Epson specification of 802.11g networking. Presenting Through a Wireless Network Ad Hoc mode (computer-to-computer mode) lets you connect just one computer to the projector at a time;...
Page 63 2. To select , press the Config You see the following screen: Easy connect mode Make sure Easy connect mode If not, use the pointer button on the remote control to highlight the checkbox next to to select it. Enter 3.
Page 64 4. If your network card supports an SSID or ESSID name (see note The projector keyword changes each time you turn the projector off and then on again, or remove and reinsert the 802.11g card. Check the keyword on the 5.
Page 65 You see a screen similar to this: Right-click and select Properties 2. Right-click the Wireless Network Connection . You see a screen similar to this: Properties 3. Click the button. Configure icon and select Click here Presenting Through a Wireless Network...
Page 66 4. Click the 5. Check your wireless card’s or adapter’s device settings. 6. Click the 7. When you’re done, click Now you’re ready to connect to the projector. See “Projecting Wirelessly” on page 83. Presenting Through a Wireless Network tab. You see a screen similar to this: Advanced (Depending on the type of card or adapter you’re using, some of the settings may be different than those listed here.)
Page 67 Setting Up Your Macintosh for Ad Hoc Mode Your AirPort software is automatically configured to allow your Macintosh to detect both computer-to-computer (Ad Hoc) and Access Point networks. Typically, you only need to select your projector’s ESSID from the AirPort status menu on the Macintosh menu bar. If you’re having problems detecting the projector, follow these steps: 1.
Page 68: Using Access Point Mode
To use Access Point (infrastructure) mode, first adjust your projector and wireless access point or AirPort base station settings as described in this section. Configuring the Projector 1. Switch the projector to EasyMP and insert the Epson 802.11g 2. To select 3. Highlight Presenting Through a Wireless Network Macintosh desktop.
Page 69 You see the following screen: Access point mode Make sure Access point mode not, use the pointer button on the remote control to highlight the checkbox next to Access point mode to select it. 4. Make sure the projector has a unique name so you can identify it when connecting to it from your computer.
Page 70 5. To enable your computer to find the projector on the network, note The projector keyword changes each time you turn 6. If you want to create a password for remote access to the the projector off and then on again, or remove and reinsert the 802.11g card.
Page 71 9. If you want to monitor the projector using HP OpenView, you’ll need to enter at least one trap IP address. See page 139 for details on monitoring the projector. 10. When you’re done making these settings, highlight the at the top of the screen (you can either use the remote control or press Highlight the button again and press...
Page 72 note On some Windows systems, you can right-click My Network Places Network Neighborhood on the desktop and select Properties Settings may vary, depending on your wireless network adapter. See the documentation for your adapter for more information. 2. Right-click the 3.
Page 73 4. Click the tab. You see a screen like this: Advanced 5. Check your wireless card’s or adapter’s device settings. (Depending on the type of card or adapter you’re using, some of the settings may be different than those listed here.) Set the Network Type to ■...
Page 74 8. Right-click the 9. Select Presenting Through a Wireless Network Wireless Network Connection select . You see this screen: Properties and click the Internet Protocol see this screen: icon again and button. You Properties...
Page 75 10. If your access point uses DHCP, select . Otherwise select automatically and enter the required information: ■ : Type in the IP address you want to assign to the IP address computer. It must be formatted like other addresses on the network;...
Page 76 13. Verify that you’ve enabled your computer’s connection to the 14. When you’re done making settings, click Now you’re ready to connect to the projector. See “Projecting Wirelessly” on page 83. Checking the Gateway IP Address on Windows If you’re entering IP addresses manually and need to find out the note gateway IP address (the IP address of your access point), make sure the If you cannot identify the...
Page 77 2. Right-click the Wireless Network Connection Status 3. Click the tab. The gateway’s IP address is listed as Support shown: Setting Up Your Macintosh for Access Point Mode Your AirPort software is automatically configured to allow your Macintosh to detect Access Point networks. Typically, you only need to select your AirPort network name from the AirPort status menu on the Macintosh menu bar.
Page 78: Select Menu
3. Make sure Location is set to Select note Automatic If you don’t need the other Select Network Port network ports, disable Configurations them by deselecting their checkboxes. If more than one network port is enabled, the projector software warns you to turn off AirPort when you first connect the projector.
Page 79: Using Wireless Security Options
10. Click the AirPort icon on the menu bar at the top of the Macintosh desktop. You see the AirPort status menu: 11. Check to make sure AirPort is turned on. 12. Select the name of your AirPort network. Using Wireless Security Options You can use the following security options when connecting to the projector wirelessly: WEP encryption, WPA security, or LEAP authentication.
Page 80: Adding Wep Encryption
Adding WEP Encryption When you click the this screen: note Text input for WEP 1. Highlight encryption varies with 2. For the WEP encryption setting, highlight different access points; check with your network administrator. Try ASCII 3. For Format, highlight first.
Page 81: Adding Wpa Security
For 64 bit WEP encryption with hexadecimal input, enter 10 ■ characters, from 0 to 9 and from A to F. For 128 bit WEP encryption with ASCII or text input, enter ■ 13 alphanumeric characters. For 64 bit WEP encryption with ASCII or text input, enter 5 ■...
Page 82: Adding Leap Authentication
Adding LEAP Authentication When you click the this screen: 1. Highlight 2. Enter the user name and password that match the settings on your note If you want to enter a blank space, use the space character that comes before the capital letter A.
Page 83: Projecting Wirelessly
Projecting Wirelessly Once you’ve started EasyMP and set up your projector and computer in either Ad Hoc mode or Access Point mode, follow these steps to start NS Connection and project wirelessly. 1. Make sure you’ve installed your 802.11g wireless card in your projector (see page 60).
Page 84 Connection, this is the first screen you see.) If the connection is working properly, you see your projector listed. If you have additional Epson projectors on the network, they are also listed, along with their status. The color of the status icon next to each projector’s name...
Page 85 the AirPort icon on your menu bar) to make sure AirPort is turned on and the projector’s ESSID or your AirPort network is selected. ■ Make sure you aren’t projecting one of the EasyMP configuration screens. (You should see a message that the projector is ready to connect.) If you have to exit a configuration screen, restart NS Connection.
Page 86 4. Once the name of your projector appears, select it and click note If you want your presentation encrypted, click and select Extension Use encrypted communication This step enhances security 5. If you set up the projector to prompt you for a keyword before but decreases the data transmission speed.
Page 87: Using The Control Bar
Using the Control Bar From the control bar, you can access these NS Connection features: Provides help for NS Connection. Lists projectors and specifies which ones are in use. Lets you access the projector’s menu system from an HTML browser window.
Page 88 If you’re using more than one projector, you can use the drop-down menu to select the projector on which you want to make any of the following changes: ■ ■ ■ ■ When you’re done, click the arrow in the upper right corner to close the submenu.
Page 89: Connecting In Ip Connect Mode
Connecting in IP Connect Mode You can establish a connection manually using IP Connect Mode even if your projector and computer are on a different subnet (Access Point mode only) or connecting over different routers. 1. Start NS Connection (see page 83). You see this screen: 2.
Page 90 3. Select 4. Click note You can add up to 16 projectors to the list. If you add more, NS Connection begins to delete projectors 5. Enter the projector’s IP address and click from the list, starting with the first projector added. Presenting Through a Wireless Network and click Use IP connect mode...
Page 91 The IP address appears in the Projector list and a icon displays: This icon indicates search is in progress This icon appears if the search fails to find the projector If the search fails to find a projector with the specified IP address, the searching icon turns into a question mark.
Page 92: Switching Between Users
Switching Between Users To connect to the projector while another person is already using it (Access Point mode only), follow these steps. 1. Start NS Connection (see page 83). You see this screen: 2. Select the projector you want to use and click 3.
Page 93: Removing The Wireless 802.11G Card
Removing the Wireless 802.11g Card Follow these steps to remove the card from your projector. 1. If you’re running NS Connection, click control bar. 2. Check the card indicator light to make sure it isn’t flashing or on. Then press the eject button. The button pops out. 3.
Page 94 Presenting Through a Wireless Network...
Page 95: Presenting From A Memory Card, Digital Camera, Or External Drive
Presenting from a Memory Card, Digital Camera, or External Drive memory card or a digital camera connected to the projector with a USB cable. You can play movies, display graphics, or play a scenario, a format that lets you create your own slideshow using PowerPoint files, JPG image files, and BMP graphics files.
Page 96: Inserting A Memory Card In The Projector
Inserting a Memory Card in the Projector note If a digital camera is Follow these steps to insert the memory card in the projector: connected to the projector, disconnect it before 1. If necessary, insert the card into a PC card inserting the memory card.
Page 97: Creating A Slideshow On The Fly
Creating a Slideshow on the Fly If you have a folder on your memory card containing an assortment of images, you can display them as a slideshow. Displaying the Slideshow First make sure the images are stored in a folder on the memory card. Then follow these steps: 1.
Page 98: Changing Timing And Other Settings
■ ■ Changing Timing and Other Settings For each folder on the memory card, you can set the display timing for your slides and change several other display settings. 1. Select the 2. From the drop-down menu, use the pointer to select 3.
Page 99: Presenting Image Files From A Digital Camera
■ Display order Lets you choose between displaying alphabetically by file name or by image file date. ■ Effect Lets you choose from various transitions between slides, such as Dissolve or Wipe. ■ Mode switching Lets you choose the mode to use when presenting slideshows, movies, or images, or editing a scenario on the projector.
Page 100: Presenting Image Files From An External Drive
4. Select EasyMP as the source by pressing the note Make sure your camera shows up on your desktop as a drive letter. If it does, it is 5. Use the probably a USB mounted device and will work with the projector software.
Page 101 2. Plug in your external hard drive. 3. Turn on the projector and the remote control, if they’re not already on. 4. Select EasyMP as the source by pressing the the remote control. 5. Use the pointer button on the remote control to position the cursor on the folder where your photos or movies are stored and press Enter...
Page 102: Creating A Scenario
Creating a Scenario note To create a scenario, you A scenario is a combination of images, movies, and/or audio files that need a memory card and a you can present from a memory card. The easiest way to create a card reader on your scenario is to drag and drop a PowerPoint file on the computer.
Page 103 5. When you see a message that the slideshow is complete, left mouse-click or press Enter shown below. The scenario is made up of individual cells for each of the PowerPoint slides. 6. At this point, you can insert additional images or create transition effects between slides.
Page 104: Creating A Scenario From Scratch
Presenting from a Memory Card, Digital Camera, or External Drive EMP SlideMaker2 desktop (or click Start > Programs > Projector EMP SlideMaker2 You see the EMP SlideMaker 2 screen: icon on your computer’s All Programs > Epson Scenario window...
Page 105 2. Choose from the File menu. You see the scenario Properties dialog box: 3. Type a name for your scenario file and folder that’s easy to remember, using up to eight capital letters and numbers. Then select from the following options: ■...
Page 106 Building a Scenario from Different Files You can build your scenario from any of the following file types, either note You can also use the alone or in combination with other file types: instructions in this section to ■ add files to an existing scenario.
Page 107 3. Drag and drop the files you want to include in your scenario from either the file window or thumbnail window into the scenario window. (You can also double-click a thumbnail to add the file to the scenario.) To include a whole PowerPoint file (instead of individual slides), drag the PowerPoint icon itself into the scenario window.
Page 108: Setting Up Transitions
6. When you’re done, click the Setting Up Transitions EMP SlideMaker 2 lets you set your slides to advance manually or automatically after a specified period of time. You can also choose from a variety of transition effects between slides. 1.
Page 109 3. Click . You see this dialog box: Cell Properties Click to change slides manually Click to change slides automatically 4. Choose how you want to advance to the next cell. If you want to change slides manually using the remote ■...
Page 110 Checking Your Scenario You can play your scenario before you transfer it to a memory card to make sure it looks and sounds the way you want it to. 1. Use the navigation tools in the folders window to locate the 2.
Page 111: Transferring Your Scenario To A Memory Card
Transferring Your Scenario to a Memory Card Once your scenario is saved, you can transfer it to a memory card. You can use any of the following standard Type II cards. Most require a PC card adapter to allow insertion into the projector (check with your computer dealer to purchase a PC card adapter).
Page 112 7. Do one of the following: Scenarios on the card note 8. To set a scenario to run automatically, select it from the list on the If more than one scenario is set to run automatically, they will play in the order listed on this screen.
Page 113: Presenting Scenarios
9. Click the box if you want your scenario to repeat Revive continuously. Clear the checkbox if you want it to play only once. 10. When done, click 11. Remove the card from your computer. See your computer’s documentation if you need instructions on removing the card. If you’re using Windows 2000 or Me, you may first need to click an icon to stop or disconnect the card Presenting Scenarios...
Page 114: Controlling Your Scenario
3. Use the note Your files may take up more than one screen. If so, use the 4. Use the Page up Page down buttons on the remote control to view all your files. 5. When you’re done with your presentation, use the Controlling Your Scenario While your scenario is running, use the remote control as follows: note...
Page 115 2. From the drop-down menu, select thumbnail images of the slides in your scenario: 3. To move a slide, select the slide you want to move and press . From the drop-down menu, select Enter line (or “I-beam”) appears beside the slide. Use the pointer button to move the I-beam where you want to insert the slide and press...
Page 116: Supported File Formats
Supported File Formats The following file types may be projected from a memory card, digital camera, external hard drive, or flash memory drive: File Type Extension Scenario .sit Graphics .bmp .gif .jpg .png Movie .mpg DPOF .mrk JPEG files with the extension “.jpeg” and “.mpeg” can’t be projected. Rename or save files as “.jpg”...
Page 117: Fine-Tuning The Projector
Fine-Tuning the Projector ou can use the projector’s on-screen menus to adjust the image, sound, and other features. This chapter covers the following information: ■ Using the menu system Adjusting the image quality ■ Adjusting the image size, shape, and position ■...
Page 118: Using The Menu System
Using the Menu System You can use the remote control or the projector’s control panel to access the menus and change settings. Follow these steps: 1. To display the menu screen, press the 2. Use the 3. Once you’ve selected the menu, use the 4.
Page 119: Restoring The Default Settings
5. After changing the settings, press the changes and return to the previous menu (or press it repeatedly to exit the menu system). You can also press the Menu Restoring the Default Settings You can use the menu system’s Reset options to restore the factory- default settings for all the settings listed in a specific menu, or all the settings in all menus.
Page 120: Adjusting The Image Quality
Adjusting the Image Quality You can use the Image menu to adjust the brightness, sharpness, color, tint, and contrast. If you’re projecting from a computer, there are additional adjustments you can make (see page 121). Adjusting the Image 1. Press the 2.
Page 121: Adjusting Signal Settings
For standard sRGB computer displays (the default sRGB: when projecting from a computer with analog video). ■ Brightness Lightens or darkens the overall image. ■ Contrast Adjusts the difference between light and dark areas. ■ Sharpness Adjusts the sharpness of the image. ■...
Page 122 2. Use the Before adjusting tracking or sync, fill the screen with an image containing fine detail. For example, in Windows you can select a pattern to appear as your desktop background. If this option isn’t available, try projecting black text on a white background.
Page 123: Adjusting The Image Size, Shape, And Position
: For a video player that outputs a Component Video component video signal. : Use Progressive Film/Auto automatically determine the setting, choose images, or choose signals to progressive signals. ■ Video Signal Leave this setting at Auto system (select PAL60 Adjusting the Image Size, Shape, and Position Whether you’re projecting from a computer or video player, you can...
Page 124 (in the Signal menu) ■ Position If the image is slightly cut off on one or more sides, it may not be centered exactly. Select this setting and use the pointer button to center it (not available for digital RGB or RGB video images). Fine-Tuning the Projector...
Page 125: Adjusting The Color
Adjusting the Color The projector provides several ways for you to adjust the color: ■ (also in the Image menu) Color Mode button Lets you quickly adjust the color and brightness for various environments. Use either the remote control or the setting in the Image menu.
Page 126: Adjusting The Sound
Adjusting the Sound You can use the Audio settings to adjust the sound volume or tone. note You can also adjust the 1. Press the volume using the remote control. 2. Choose 3. Use the Using the Projector Security Features To prevent unauthorized use of the projector, you can do the following: ■...
Page 127: Enabling Password Protection
If an incorrect password is entered thirty times in succession, the user must contact Epson to unlock the projector. The default setting for the Password Protect function is these steps to turn password protection on: 1.
Page 128 5. Press the 6. Use the numeric keypad to enter a four digit password. (The 7. When you see a confirmation message, reenter the password. 8. Press the 9. If you want to disable the password temporarily, select 10. To enable your screen logo, select Fine-Tuning the Projector button on the remote control.
Page 129: Starting The Projector With A Password
When you see the Password Protect Release screen again, you can try to enter the correct password. If you have forgotten the password, contact Epson with the request code number that appears in the Password Protect Release screen for assistance. See “Where To Get Help” on page 181.
Page 130: Creating Your Own Startup Screen
Creating Your Own Startup Screen You can transfer any image from your computer or video source to the projector and then use it as your startup screen. You can also use it as the screen displayed when the projector is not receiving a signal or when you press the logo, slogan, photograph, or any other image you want to use.
Page 131: Choosing When To Display The Image
7. When the message Save image as user’s logo? and press . Saving the logo may take a few moments. Enter Do not use your projector or video source while the logo is being saved. 8. When you see the message Completed menu screen.
Page 132: Controlling Multiple Projectors
Controlling Multiple Projectors If you’re using more than one projector for your presentation, you can note switch between them using a single remote control. To do this, you By default, the remote need to set a different ID for each projector. During the presentation, control’s ID is set to zero, you can change the remote control’s ID to match that of the projector which allows it to control...
Page 133: Changing The Remote Control Id
Changing the Remote Control ID To change the remote control’s ID to match the projector’s ID, follow these steps: 1. Press the button on the remote control. You see it light. 2. Press one of the numbered buttons on the remote control to select the ID of the projector you want to operate.
Page 134: Customizing Projector Features
Customizing Projector Features You can use the menu system to turn Standby Mode on or off, adjust the network settings, select the projection mode, change the language, and turn Sleep Mode on or off. Remote Monitoring Setup Options note These options let you set up the projector so it can be monitored and When Standby Mode is set controlled from a remote computer (see page 138).
Page 135: Enabling Quick Setup Options
Enabling Quick Setup Options Your projector can quickly detect and set up the focus, straighten the image, and adjust the colors for the surface the image is being projected on. Follow these steps to enable these features: 1. Press the button on the remote control.
Page 136: Automatically Running Quick Setup
Automatically Running Quick Setup note To automatically run quick setup whenever you turn on the projector, Auomatic Quick Setup follow these steps: works only when the projector is set to Front 1. Press the . See page 187 projection for more information. 2.
Page 137: Managing Projectors
Managing Projectors and control your projectors from a remote computer: ■ note If you’re using a network ■ management utility running SNMP, you can configure your network to send trap ■ alerts even without a plug-in (see page 138). This feature is intended for use by network administrators You can also use NS Connection to register up to 16 projectors as a...
Page 138: Connecting And Configuring The Projector On A Network
Connecting and Configuring the Projector on a Network Before using the EasyManagement software to manage your projector(s), you have to connect each projector you want to monitor note to your network and configure it with an appropriate IP address. You If you’re a network can connect and configure the projector wirelessly, as described on administrator, you can use...
Page 139: Using Emp Monitor
To start EMP Monitor, click Start > Programs Epson Projector > EMP Monitor If you’ve added the program to the Startup programs folder, then it may already be open. If so, click the icon in the system tray on the...
Page 140: Registering Your Projectors
62 to configure the projector for 3. Click a wireless network. Managing Projectors Start > Programs All Programs > Epson Projector > or click the EMP Monitor EMP Monitor see this screen: Click here . You see this screen:...
Page 141 Any projectors found on the network are listed as shown below: 4. Select each projector you want to add by clicking its name, then clicking the button. When you’re done, click You see this screen with a list of all registered projectors. 5.
Page 142: Monitoring Your Projectors
You see the status of each of your registered projectors on the main EMP Monitor screen: Monitoring Your Projectors note The EMP Monitor screen lets you monitor your projectors using the To monitor a projector Status, Video Source, and Error icons shown below. These let you see when it’s in standby mode which projectors are currently being used, from which source (or port) (plugged in but not turned...
Page 143 The following table explains the meaning of the status icons: Status icons (green) Projecting; no problems (dark) Turned off; no problems (green) Projecting; problems detected (dark) Turned off; problems detected Network error (for example, not connected to the network or power cable disconnected). You may also see this error if Network OFF is selected in Standby Mode (see page 134).
Page 144: Controlling Your Projectors
The following table explains the meaning of the error icons. See page 167 for recommended solutions to problems. Error icons note Controlling Your Projectors To turn on a projector when The control buttons in the upper-right let you select video signals and it’s in standby mode turn projectors on or off.
Page 145: Using E-Mail Alerts
LAN connection. 1. Do one of the following: ■ Insert the Epson 802.11g wireless card and set up your projector to work in Access Point mode, as described on page 68.
Page 146 3. Press the 4. Select 5. When you see the screen below, select Select Mail Managing Projectors button on the remote control to switch to EasyMP EasyMP. You see the following screen: in the lower right corner of the screen and press Config on the remote control.
Page 147 You see the following screen: 6. For Mail Notification Settings, select 7. Highlight the IP address of SMTP server The box turns yellow to indicate you are in input mode. You can enter numbers between 0 and 255. However, you cannot use the following IP addresses: 255.255.255.255, 224.0.0.0, or 127.x.x.x (where x is a number between 0 and 255).
Page 148: Understanding The Notification Messages
Understanding the Notification Messages If a projector experiences a problem, it sends an e-mail message to each of the addresses you provided using EMP NetworkManager. The message includes “Epson Projector” in the subject line. The body of the message contains: ■ ■...
Page 149: Using A Browser To Monitor Projectors
138. (Standby Mode in the Extended menu should be set to projectors in standby mode.) Make sure the Epson 802.11g wireless card is inserted in the ■ projector’s card slot and the projector is configured for Access Point mode, as described on page 68.
Page 150 Menus 4. Select one of the menu options listed on the left, then change any 5. Use the controls at the bottom of the screen just as you would the Managing Projectors If you’re connected over an 802.11g wireless network, start NS Connection (see page 83) and connect to the projector you want to monitor.
Page 151: Using Projector Groups
Using Projector Groups You can register projectors as a group if you want to provide quick and easy access to other computers. You can also export or import group information as a file to another computer. Projectors must be connected to the network in Access Point mode, and must be on the same network segment as the computer used to create the group, or the computers that import or export group information.
Page 152 4. Click the 5. Enter a name for the group in the note You cannot use the addresses 0.0.0.0 or 255.255.255.255. Managing Projectors button. You see this screen: Advanced Then enter the IP address of the projector you want to register in box: IP address box.
Page 153 6. Click . The IP address appears in the list of registered projectors and the searching icon appears beside it. If the projector is found, its name appears in the projector list. 7. Repeat steps 5 and 6 for each projector you want to add to the group.
Page 154: Connecting To A Projector In A Group
Connecting to a Projector in a Group Follow these steps to connect to a projector in a group: 1. Start NS Connection. (See page 83.) 2. Click the Select these two boxes 3. Select Managing Projectors button on the EMP NS Connection screen. Extension You see this screen: Use IP connect mode...
Page 155 4. From the Connection Group list, choose the group you want to connect to and click 5. When you see the next screen, click left button on the screen says , skip this step.) Automatic search mode You see this screen: Select the projector Then click...
Page 156: Exporting A Projector Group
7. If you want, repeat step 5 to connect to additional projectors. Exporting a Projector Group note You can export group information as a file to another computer on You must export all of the the wireless network. This is useful if you want to share group access groups in the Connection with multiple users.
Page 157 4. Click the button. You see this screen. Advanced 5. Click to export a file for all groups in the Connection Export Group list. 6. Highlight the file name ( NSGroup.ini 7. Choose a location on the second computer and click To connect to the projector from the new computer, follow the steps beginning on page 154.
Page 158: Importing A Projector Group
Importing a Projector Group You can also import group information as a file to another computer on the wireless network. 1. Start NS Connection. (See page 83.) 2. Then click the Select these two boxes 3. Select 4. Click the Managing Projectors button on the EMP NS Connection Extension...
Page 159 5. Click Import 6. On the next screen, select the file you want to import and click Open The names of all of the groups in the file are added to the Connection Group list on the Advanced screen. To connect to the projector from the new computer, follow the steps beginning on page 154.
Page 160 Managing Projectors...
Page 161: Maintaining The Projector
Maintaining the Projector warning the lens clean and periodically clean the air filters at the side and base Before you clean any part of of the projector. A clogged air filter can block ventilation needed to the projector, turn it off and cool the projector.
Page 162: Cleaning The Lens
Cleaning the Lens Clean the lens whenever you notice dirt or dust on the surface. Use a canister of compressed air to remove dust. To remove dirt or smears on the lens, use lens-cleaning tissue. If necessary, moisten a soft cloth with lens cleaner and gently wipe the lens.
Page 163: Replacing The Lamp And Air Filters
3. If the dirt is difficult to remove or a filter is broken, replace the filters as described on the next page. Contact your dealer or call Epson at (800) 873-7766 in the United States to obtain new ones. In Canada, please call (800) 463-7766 for dealer referral.
Page 164 Follow these steps to replace the lamp and air filters: 1. Turn off the projector. warning 2. When the Let the lamp cool fully before replacing it. 3. Let the projector cool for at least an hour (if it has been on). The In the unlikely event that the lamp has broken, small 4.
Page 165: Resetting The Lamp Timer
8. Loosen the two screws holding the lamp in place (you don’t need to remove them). 9. Grasp the handles as shown and pull the lamp straight out. 10. Gently insert the new lamp. (If it doesn’t fit easily, make sure it is facing the right way.) 11.
Page 166: Transporting The Projector
The projector contains many glass and precision parts. Follow these guidelines to prevent damage: ■ note ■ Epson shall not be liable for any damages incurred during transportation. Maintaining the Projector pointer button on the remote control (or the arrow...
Page 167: Solving Problems
Solving Problems his chapter helps you solve problems with your projector, and tells you how to contact technical support for problems you can’t solve yourself. The following information is included: ■ Using the projector’s on-screen help system What to do when the projector’s status lights flash ■...
Page 168: Using On-Screen Help
Using On-Screen Help If the image doesn’t look right or your audio isn’t working, you can get help by pressing the blue on the remote control. The following choices are available: ■ ■ ■ Follow these steps to get help: 1.
Page 169: Checking Projector Status
Flashing red There is a problem with the fan or temperature sensor. Stop using the projector, disconnect the power cable, and contact Epson. Power light Lamp light Temperature light...
Page 170 Flashing red Power is cut off because of an internal problem. Unplug the power cord and contact Epson for help, as described on page 181. Red / Flashing The lamp may be cracked or installed incorrectly. Check the lamp; if it is cracked, you must replace it (as described on page 163) before you can use the projector again.
Page 171: Viewing Lamp Usage And Other Information
Viewing Lamp Usage and Other Information Use the Info menu to view information about the display settings of your computer and the number of hours the lamp has been used. Press the button and highlight the Menu You see the lamp usage hours and various input signal settings on the right.
Page 172 ■ ■ If you’re using a PC notebook: ■ ■ If you’re using Macintosh OS X: 1. Open 2. Click 3. Make sure the 4. Click the 5. Make sure the If you’re using Macintosh OS 8.6 to 9.x: 1. From the Apple menu, select 2.
Page 173 5. Select one of the listed Simulscan seconds for the projector to sync up after making the selection.) The message Not Supported ■ Make sure the correct input signal is selected in the Signal menu (see page 121). ■ Make sure your computer’s resolution doesn’t exceed UXGA (1600 ×...
Page 174 The image isn’t square, but keystone-shaped. ■ ■ ■ The image contains static or noise. ■ ■ ■ ■ The image is blurry. ■ ■ ■ Solving Problems If the top or bottom of the image is broader, press the button on the projector until the image is square.
Page 175 Adjust the setting on the Image menu (see page 120). ■ Sharpness When you change video settings, you should be able to see the effect on the screen immediately. If you’re projecting from a computer, you may also need to adjust the tracking and sync as described in the next section.
Page 176 The image colors are incorrect. note ■ Because of the different technologies used, your projected image may not exactly match the colors on your notebook or computer monitor. ■ There is no sound. ■ ■ ■ ■ ■ Solving Problems If you’re displaying a computer image, use the option in the projector’s Image menu to adjust the color.
Page 177: Solving Easymanagement Problems
You can’t connect to the projector using NS Connection. ■ Make sure you’ve installed the Epson 802.11g card correctly in the projector; see page 60. If you have to reinstall the card, restart NS Connection or the program will not be able to detect the projector.
Page 178 ■ ■ ■ ■ ■ ■ ■ Solving Problems If you’ve changed any settings for your projector or network, or restarted your computer, allow a minute or two for the connection to appear. If you’re using AirPort, try turning AirPort off and then on again.
Page 179 If you’re using Access Point mode and you’re connecting to the ■ wrong network, you may be experiencing signal interference from another network. Try resetting your access point or base station, then restart NS Connection. If you’re using AirPort, the projector’s ESSID should match the ■...
Page 180 You can’t edit scenario files in EMP SlideMaker after they have been transferred to the memory card. You can only edit scenarios before they are transferred. Open the scenario files saved on your hard drive, make any changes, then transfer the scenario to your memory card. You can’t transfer your slideshow to the memory card because you aren’t able to see the card’s drive letter.
Page 181: Solving Problems With The Remote Control
Where To Get Help Epson provides the following technical support services. Internet Support Visit Epson’s support website at http://support.epson.com and select your product for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions.
Page 182: Speak To A Support Representative
Speak to a Support Representative To use the Epson PrivateLine Support service, call (800) 637-7661 and enter the PIN on the included Epson PrivateLine Support card. This is the fastest way of speaking to a live representative, and it’s free.
Page 183: Software Installation
Software Installation use the projector’s EasyMP features—for presenting over a wireless network, transferring PowerPoint presentations to a memory card, note and monitoring the projector from a remote location. You can present over a wireless network from a Macintosh running OS X, but you can only monitor the Windows System Requirements projector from a remote...
Page 184: Macintosh System Requirements
Macintosh System Requirements Before you install the software, make sure your Macintosh meets the following requirements: ■ ■ ■ ■ ■ ■ Software Installation Macintosh OS X 10.2.4 or later AirPort (802.11b) or AirPort Extreme (802.11g) wireless network interface ® Power Macintosh series, iMac, At least 256MB of RAM...
Page 185: Installing The Software On A Windows System
, then follow the on-screen instructions to install Install your projector software. If you see a message that the Epson GDI Monitor Driver has not passed Windows Logo testing, click 3. When installation is complete, close the installation window. Continue Anyway...
Page 186: Installing The Software On A Macintosh
1. Insert the EasyMP software CD-ROM in your drive. 2. If necessary, double-click the 3. Double-click the 4. Click 5. When installation is complete, close the installation window. Software Installation Epson window. Installer for Mac OS X screen: , then follow the on-screen instructions to install the Install software.
Page 187: Projector Installation
Projector Installation permanent location, such as a theater or conference room. The projector can be installed for four different viewing setups: front projection, ceiling mounting, rear projection onto a semi-transparent screen, or rear/ceiling projection, as shown: warning To project from overhead, you’ll need the optional ceiling mounting When installing or adjusting hardware;...
Page 188 You can correct the distortion using the function in the Keystone projector’s menu system (see page 123) or the keystone buttons on the projector’s control panel. If you place the projector so that the base of the lens is level with the bottom of the screen, the image should be square and you won’t have to adjust it.
Page 189: Technical Specifications
Technical Specifications General Type of display Poly-silicon TFT active matrix Size of LCD panels Diagonal: 0.8 inches (20.3 mm) Resolution (native format) 1024 × 768 pixels (XGA) Color reproduction 24 bit, 16.8 million colors Brightness 3000 lumens (High Brightness mode) 2200 lumens (Low Brightness mode) Contrast ratio 600:1...
Page 190: Projection Lamp
Projection Lamp Type Power consumption Lamp life note Turn off this product when not in use to prolong the life of the projector. Part number Remote Control Range Batteries (2) Dimensions Height Width Depth Weight Electrical Rated frequency Power supply Power consumption Environmental Temperature...
Page 191: Safety
Safety United States FCC 47CFR Part 15B Class B (DoC) UL60950 Third Edition Canada ICES-003 Class B CSA C22.2 No. 60950 (cUL) CE Marking Directive 73/23/EEC Directive 89/336/EEC IEC 60950 Third Edition EN 55022, EN 55024 ™ Pixelworks Compatible Video Formats The projector supports NTSC, PAL, and SECAM international video standards, as well as the monitor display formats listed below.
Page 192 NTSC NTSC 4:43 N-PAL M-PAL PAL—60 SECAM HDTV (720p) HDTV (1080i) SDTV (480i) SDTV (480p) SDTV (625i) SDTV (625p) The image is resized using Epson’s SizeWise Technical Specifications Refresh Rate (Hz) Resolution × 1024 × 1024 × 1024 × 1024 ×...
Page 193: Notices
Notices his appendix includes safety instructions and other important information about your Epson PowerLite projector. Important Safety Instructions Follow these safety instructions when setting up and using the projector: ■ Do not place the projector on an unstable cart, stand, or table.
Page 194 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ WARNING: This product contains chemicals, including lead, known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. Notices Never push objects of any kind through the cabinet slots. Never spill liquid of any kind into the projector.
Page 195: Remote Control Information
Remote Control Information You can operate the projector by remote control via a line-of-sight infrared (IR) receiver at the front and rear of the projector. The projector may not respond to remote control commands under the following conditions: ■ There is an object between the remote control IR emitter and the IR receiver on the projector.
Page 196: Declaration Of Conformity
Trade Name: Type of Product: Projector Model: Marketing Name: PowerLite 835p Notices Epson America, Inc. 3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806-2469 (562) 290-5254 Epson EMP-835...
Page 197: Fcc Compliance Statement
FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Page 198: Warranty
When warranty service involves the exchange of the product or of a part, the item replaced becomes Epson property. The exchanged product or part may be new or previously refurbished to the Epson standard of quality, and at Epson’s option, the replacement may be another model of like kind and quality.
Page 199 To locate the Authorized Epson Servicer nearest you, call the Epson Connection at (800) 637-7661 + PIN or (562) 276-4394 in the U.S. and (905) 709-3839 in Canada or write to: Epson America, Inc., P.O. Box 93012, Long Beach, CA 90809-3012. Notices...
Page 200 Notices...
Page 201: Index
Index A/V Mute, 37, 131, 171 About menu, 165 to 166, 171 Access Point mode, 68 to 79, 89 to 92 Access point, checking IP address of, 76 to 77 Accessories, 13, 182 Ad Hoc mode, 62 to 68 Adapter, Macintosh, 13, 48 Air filter cleaning, 162 to 163 ordering, 13...
Page 202 108 to 109 transferring scenarios to memory card, 111 to 113 Encryption, 66, 73, 80 to 81, 86 Environmental specifications, 190 Epson accessories, 13, 182 presentation tips, 10 PrivateLine Support, 11, 182 technical support, 10, 181 to 182...
Page 203 158 to 159 HDTV images, video formats, 192 Height of image, adjusting, 24 Help system, using, 168 Help, Epson, 10, 181 to 182 HP OpenView, 71, 137 ID setting, 132 to 133 Image adjusting, 24 to 28, 120 to 125...
Page 204 Menus About, 165 to 166, 171 changing settings, 118 to 119 default settings, restoring, 119 Image, 120 to 123 Signal, 121 to 123 User’s Logo, 130 to 131 Microdrive, 111 Monitor, connecting external, 50 Monitoring projector EMP Monitor, 139 to 145 HP OpenView, 137 receiving e-mail alerts, 145 to 148 remote setup options, 134...
Page 205 Preset setting, 122 Pre-shared key, 81 PrivateLine Support, 11, 182 Problems color, 176 connecting wirelessly, 84 to 85, 177 to 179 image, 171 to 176 monitoring projector, 177 no signal, 21, 171 to 173 remote control, 181 scenarios, 179 to 180 sound, 176 using on-screen help, 168 Progressive format, 116...
Page 206 Safety instructions, 193 to 194 specifications, 191 Scenarios adding movie files, 106 to 108 adding sound, 105 background color, 105 cells, 103, 107 converting PowerPoint files, 102 to 103 creating, 102 to 109 default location, 105 editing on the projector, 114 to 115 exiting, 98, 114 presenting on the projector, 113 to 114 previewing, 110...
Page 207 Technical support, 10, 181 to 182 Temperature requirements, 190 status light, 169 to 170 Theatre color mode, 120, 125 Thumbnails, scenario, 106 Tone, adjusting, 126 Tracking, adjusting, 28, 175 Transitions, scenario, 108 to 109 Transporting projector, 166 Trap IP address, 71 Troubleshooting blank screen, 21 to 23, 171 to 172 cut-off image, 173...
Page 208 Index...
Page 209 Air exhaust vent Speaker Adjustable foot Lens cover Back USB ports (type A and B) Control port for service use only Monitor-out port Audio-out port Power inlet Video port and related audio ports Remote control receiver and Quick Setup sensor Computer 2/ Component Card...
Page 210: Remote Control
Remote Control Page Up and Down Changes slides in PowerPoint A/V buttons Control image and sound Light button Illuminates remote control buttons Enter and Esc Use as mouse buttons or to make menu selections Menu button Activates menu system Preview button Displays active image sources Wall Shot button...

This manual is also suitable for:

Emp-835

Epson PowerLite 835p User Manual

1 Displaying and Adjusting the Image

2 Using the Remote Control

3 Connecting to Computers, Cameras, and Other Equipment

4 Presenting through a Wireless Network

5 Presenting from a Memory Card, Digital Camera, or External Drive

6 Fine-Tuning the Projector

7 Managing Projectors

8 Maintaining the Projector

9 Solving Problems

Software Installation

Projector Installation

Technical Specifications

Notices

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Epson PowerLite 835p

Summary of Contents for Epson PowerLite 835p

This manual is also suitable for: