Creating Your Own Startup Screen; Capturing The Image - Epson PowerLite Presenter i/i+ User Manual

Creating your own startup screen

You can transfer any image from your computer or video source to the projector and then use
it as your startup screen. You can also use it as the screen displayed when the projector is not
receiving a signal or when you press the
logo, slogan, photograph, or any other image you want to use.
Note: When you choose an image for the user's logo, it erases any previously used image. You
can save an image up to 300 × 400 pixels in size. Once you have saved a new user's logo, you
cannot return to the factory default EPSON logo.

Capturing the image

Start by displaying the image you want to use from either a computer or video source, such as
a DVD player or digital camera. Then follow these steps to capture the image and transfer it
to the projector:
1. Press the button on the remote control, highlight the
Menu
the enter button.
2. Highlight
User's Logo
3. When you see a message asking
and press the enter button. A selection box displays over the image.
4. Use the u, d, l, or r buttons to select the area of the image you want to use. Then press
the enter button.
5. When you see the message
button.
6. Use the u, d, l, or r buttons to select a zoom factor (display size) and press the enter
button.
A/V mute button. The image can be a company
and press the enter button.
Choose this image as the User's Logo?
Select this image?
Extended
, highlight and press the enter
Yes
Making detailed adjustments
menu, and press
, select
Yes
51