Cleaning And Transporting Your Product; Cleaning Your Scanner; Transporting Your Scanner - Epson Perfection V19 II User Manual

Cleaning and Transporting Your Product

See these sections if you need to clean or transport your product.

Cleaning Your Scanner

Transporting Your Scanner

Cleaning Your Scanner
To keep your product working at its best, you should clean it several times a year.
Caution: Do not use a hard brush, alcohol, or paint thinner to clean the product or you may damage it.
Do not use oil or other lubricants inside the product or let water get inside it. Do not open the product
case. Do not press the surface of the scanner glass with any force and be careful not to scratch or
damage the scanner glass. A damaged glass surface can decrease the scan quality.
1. Disconnect the USB cable.
2. Clean the outer case with a cloth dampened with mild detergent and water.
3. If the scanner glass gets dirty, clean it with a soft, dry cloth. If the glass surface is stained with grease
or some other hard-to-remove material, use a small amount of glass cleaner on a soft cloth to
remove it. Wipe off all remaining liquid.
Note: Do not spray glass cleaner directly on the scanner glass. Make sure that no dust builds up on
the surface of the scanner glass. Dust can cause spots in your scanned images.
4. If the document mat is dirty, dampen a soft cloth with mild detergent and water, wring it out
thoroughly, and then wipe off any remaining stains. After that, use a soft dry cloth to wipe the mat.
Parent topic:
Transporting Your Scanner
If you need to ship your product, transport it a long distance, or store it for an extended period, prepare it
for transportation as described here.
Cleaning and Transporting Your Product
54