Chapter 7 Maintaining And Transporting Your Scanner; Cleaning The Scanner - Epson GT-10000+ User Manual

Chapter 7
Maintaining and
Transporting Your Scanner
This chapter explains how to care for your scanner and prepare it for a move.

Cleaning the Scanner

To keep your scanner operating at its best, you should clean it periodically. Before
cleaning it, turn the scanner off and unplug its power cable. Then clean the outside
with a soft cloth using mild detergent diluted in water.
If the glass of the document table gets dirty, clean it with a soft, dry, lint-free cloth. If
grease or other hard-to-remove material gets on the glass, remove it with a small
amount of glass cleaner on a soft, lint-free cloth. Wipe off any remaining moisture
with a dry, lint-free cloth.
Do not:
Scratch or damage the document table glass.
Use a hard or abrasive brush to clean the scanner.
Use alcohol, thinner, or corrosive solvents.
Spill liquids into the scanner mechanism or electronic components.
Spray lubricants inside the scanner.
93