Lights - Epson Stylus Pro 7900 User Manual

Epson Stylus Pro 7900/7910/9900/9910
7. Menu button ( )
O Enters the Menu mode when pressed in the
READY state.
See "Menu Mode" on page 16
O Enters the PRINTER STATUS menu if pressed
during printing.
See "PRINTER STATUS" on page 24
O When pressed in the Menu mode, a desired menu
can be selected.
8. OK button ( )
O Sets the selected parameter in the selected item in
the Menu mode. Executes the item if the selected
item is for execution only.
O The printer ejects the cut sheet by pressing this
button after printing.
O Press this button during ink drying or color chart
drying, the printer stops the operation.
O When you press this button while there is no paper
in the printer, you can see the paper feeding
procedures on the LCD panel.
9. Paper Cut button (
Cut the roll paper by the built-in cutter.
10. Paper Secure button (
O This button locks or unlocks the paper presser.
When you set the paper, press the button to unlock
the paper presser first, and then set the paper. Press
the button again so the printer starts feeding the
paper and then goes to the READY state.
O When you press this button while REMAINING
PAPER SETUP is ON, a barcode is printed on the roll
paper edge and the paper presser is released.
User's Guide
)
)

Lights

1 Power light On
Flashing
Off
2 Paper Check On
light
Flashing
Off
3 Ink Check On
light
Flashing
Off
4 Pause light On
Off
5 Paper On
Secure light
Off
The printer is on.
The printer is receiving
the data.
The printer is in process
of turning off.
The printer is off.
No paper is loaded in the
paper source.
The paper setting is not
correct.
Paper is jammed.
Paper is not loaded
straight.
The printer is ready to
print data.
The installed ink
cartridge is expended.
The ink cartridge is not
installed.
The wrong ink cartridge
is installed.
The installed ink
cartridge is nearly
expended.
The printer is ready for
print data.
The printer is in the
Menu mode or pause
mode.
The printer has an error.
The printer is ready to
print data.
The paper presser is
released.
The printer is ready to
print data.
The Control Panel 13