Thick Paper - Epson Stylus Pro 7900 User Manual

Epson Stylus Pro 7900/7910/9900/9910
D
Load the sheet into the paper insertion slot until
it meets resistance.
Align the right edge of the paper with the setting
position, and then insert the paper until it meets
resistance. When using paper sizes A4 or below,
set the paper until it reaches the bottom along
the line on the metal part under the paper
insertion slot.
PRESS THE BUTTON appears on the LCD
panel.
Note:
Load the sheet vertically, like most magazines.
E
Press the button.
The paper moves to the start position.
F
If ARE THESE SETTINGS OK? appears on the
LCD panel, press the
NO and then press the
type and paper remaining, and then press the
button to set the media.
The previous setting appears on the LCD panel.
If the media type and paper remaining are
correct, select YES and then press the
button.
G
If you use the paper basket, set it backward
position.
See "Using the paper basket and paper
guides" on page 43
User's Guide
or button to select
button. Set the media
Loading cut sheet A3 size or
larger / thick paper
When you load a cut sheet media A3 or larger or thick
paper (0.5 to 1.5 mm), follow the steps below.
Setting direction of the paper is as indicated below.
Paper
A3 or larger cut sheet (with
thickness of 0.5 mm or less)
Thick paper with length of 728
mm or less
Thick paper with length of 728
mm or longer
A
Turn on the printer by pressing the
B
Press the button repeatedly until Sheet
appears.
C
Make sure that the roll paper cover is closed.
D
Press the button.
Direction
Vertical
Vertical
Horizontal
button.
Paper Handling 40