Epson Stylus Pro 7900/7910/9900/9910
E
Insert the new maintenance tank into place as
far as it will go.
Caution:
c
Do not touch the green chip on the side of
the maintenance tank. Doing so may
prevent normal operation.
F
For Epson Stylus Pro 9900/9910, repeat step 3 to
5 to replace the maintenance tank on the other
side.
User's Guide
Replacing the Cutter
When the paper cutter does not cut cleanly, it may be
dull and require replacement. See the following section
for the product code of the paper cutter that is
supported with this printer.
See "Options and Consumable Products" on page
63
Caution:
c
Take care not to damage the cutter blade.
Dropping it or knocking it against hard objects
may chip the blade.
A
Make sure the printer is on.
If paper is loaded, remove it from the printer.
B
Press the
C
Press the
MAINTENANCE, and then press the
D
Press the
REPLACEMENT, and then press the
button to enter the Menu mode.
/
button to select
/
button to select CUTTER
Maintenance
button.
button.
73