Power Cleaning - Epson Stylus Pro 7900 User Manual

Epson Stylus Pro 7900/7910/9900/9910
E
Press the button.
The Power light starts flashing and the head
cleaning starts (it takes 2 to 13 minutes.) The
cleaning is finished when the Power light is on.
F
Print a nozzle check pattern, and check the
result.
See "Nozzle check" on page 77
Note:
O If the nozzles are still clogged after cleaning
the print head a few times, perform power
cleaning.
See "Power cleaning" on page 81
O Power cleaning process consumes more ink
than normal cleaning.
O If the nozzles are still clogged after
performing the power cleaning, turn off the
printer and leave it overnight or longer, so
that the ink may dissolve.
If the nozzles are still clogged, contact your
Epson dealer.
O If the CLEANING ERROR appears on the
LCD panel, see the following section to
solve the problem.
See "Error Messages on the LCD Panel"
on page 90
User's Guide

Power cleaning

If the nozzles are still clogged after performing head
cleaning a few times, perform power cleaning.
A
Press the
B
Press the
MAINTENANCE, and then press the
C
Press the
and then press the
D
Press the
CLEANING, and then press the
E
Press the
PLEASE WAIT appears on the LCD panel. It
takes about 4 minutes to complete power
cleaning.
F
Print a nozzle check pattern to see if there are
any missing dots.
See "Nozzle check" on page 77
button to enter the Menu mode.
/ button to display
/ button to select CLEANING,
button.
/ button to select POWER
button.
button to execute power cleaning.
Maintenance
button.
81