Standards And Approvals; Interface - Epson Stylus Pro 7900 User Manual

Epson Stylus Pro 7900/7910/9900/9910

Standards and Approvals

Safety UL 60950-1
CAN/CSA C22.2 No.60950-1
Low Voltage Directive
2006/95/EC
EMC FCC part 15 subpart B Class B
CAN/CSA-CEI/IEC CISPR 22 Class B
AS/NZS CISPR 22 Class B
EMC Directive
2004/108/EC
For Users in Europe
Warning:
w
This is a class A product. In a domestic
environment this product may cause radio
interference in which case the user may be
required to take adequate measures.
User's Guide

Interface

Your printer is equipped with a USB interface and an
Ethernet interface.
USB interface
EN 60950-1
The printer's built-in USB interface is based on the
standards specified in the Universal Serial Bus
Specifications Revision 2.0 and the Universal Serial Bus
Device Class Definition for Printing Devices Version
1.1. This interface has the following characteristics.
EN 55022
Class A
Standard
EN 55024
EN 61000-3-2
EN 61000-3-3
Bit rate
Data encoding
Adaptable
connector
Note:
Only computer equipped with a USB connector and
running Windows 7, Windows Vista, XP x 64, XP,
2000, or Mac OS X.10.x support the USB interface.
Ethernet interface
The printer has a built-in Ethernet interface. Use a
10BASE-T, 100BASE-TX STP (shielded twisted-pair)
cable via the RJ-45 connector to connect to a network.
Based on Universal Serial Bus
Specifications Revision 2.0,
Universal Serial Bus Device Class
Definition for Printing Devices
Version 1.1
480 Mbps (High Speed Mode)
12 Mbps (Full Speed Device)
NRZI
USB Series B
Product Information 194