Epson Stylus Pro 7900/7910/9900/9910
C
Remove the flange by pinching the knob.
D
Reverse the flange so that the smaller knob is
positioned on the outside, then replace it on the
movable unit by pinching the knob.
User's Guide
Installing a take-up reel core
The method of installing the take-up reel unit is the
same for both 2-inch and 3-inch reel cores.
A
Make sure that the lock lever is released (turned
to the left). Slide the movable unit to the left end
of the horizontal strut.
B
Slip one end of the take-up reel core over the
flanged knob on the drive unit.
C
Insert the flanged knob on the movable unit into
the other end of the take-up reel core.
Paper Handling
52