Replacing The Maintenance Tank; Confirming The Free Space Of The Maintenance Tank - Epson Stylus Pro 7900 User Manual

Epson Stylus Pro 7900/7910/9900/9910
Replacing the
Maintenance Tank
The maintenance tank absorbs ink discharged when
cleaning the print head. There are two maintenance
tanks placed on the left and right for Epson Stylus Pro
9900/9910 and one placed on the right for Epson Stylus
Pro 7900/7910. You need to replace the maintenance
tank when the LCD panel instructs to do so.
Confirming the free space of the
maintenance tank
Using the printer's control panel
The free space of the maintenance tank is always
displayed on the LCD panel.
See "Display" on page 14
You can check the free space in the PRINTER STATUS
menu. You need to check it before printing a lot of
data. If the maintenance tank has not enough empty
space, prepare a new one.
See "Using the Menu mode" on page 16
See "PRINTER STATUS" on page 24
Using the printer driver
You can check the free space of the maintenance tank
on your computer by using EPSON Status Monitor.
The instructions are the same as confirming the ink
cartridge remaining.
See "Using the printer driver" on page 68
User's Guide

Replacing the maintenance tank

Be sure to use a maintenance tank that is supported
with this printer.
See "Options and Consumable Products" on page
63
Caution:
c
Do not replace the maintenance tank while
printing data.
A
Turn off the printer.
B
Take a new maintenance tank out of the
package.
C
Put your hand on the handle of the maintenance
tank, then gently pull it straight out.
D
Put the used maintenance tank in the plastic bag
provided with the replacement cartridge, and
dispose of it properly.
Maintenance 72