Canceling Printing Using The Computer; (Mac Os X); Canceling Printing Using The Printer; Changing The Black Ink - Epson Stylus Pro 7900 User Manual

Epson Stylus Pro 7900/7910/9900/9910
Canceling printing using the
computer (Mac OS X)
A
Click the Printer icon in the Dock.
B
Select the job you want to delete, and then click
the Delete button.
If the job has been sent to the printer, the print
data does not appear in the dialog above. In this
case, cancel the print job using the printer.
Canceling printing using the
printer
Press the button to select JOB CANCEL, and then
press the button.
Even when it is printing a job, the printing is canceled.
After canceling the job, it takes a while before the
printer is in the READY state.
Note:
You cannot cancel a job spooling in the computer. To
cancel a job spooling in the computer, see the section
"Canceling printing using the computer (Windows)" on
page 60 or "Canceling printing using the computer (Mac
OS X)" on page 61.
User's Guide

Changing the Black Ink

Both Photo and Matte Black ink are installed in this
printer.
Photo Black ink can be used for photo papers with
professional quality results. Matte Black ink
significantly increases black optical density when
printing on matte and fine art type papers.
See the following section for the suitable black ink for
the media type.
"Paper Information" on page 172
To switch the black ink, press the
printer's control panel.
To change the black ink from Photo Black to Matte
Black, it takes about two minutes and consumes
approximately 1.2 ml of ink. To change the black ink
from Matte Black to Photo Black, it takes about three
minutes and consumes approximately 3.4 ml of ink.
Therefore, we recommend performing the printing in a
planned manner to avoid consuming the ink
needlessly.
Follow the steps below to select the black ink when the
media type supports both Photo and Matte Black ink.
A
Set CHANGE BLACK INK to AUTO in the Menu.
If CHANGE BLACK INK is set to AUTO, you can
automatically switch black ink from the printer
driver.
The factory setting is MANUAL.
"PRINTER SETUP" on page 21
button on the
See
Basic Settings 61