Borderless Printing; Supported Media Type - Epson Stylus Pro 7900 User Manual

Epson Stylus Pro 7900/7910/9900/9910

Borderless Printing

You can print your data without margins on paper.
There are two types of borderless printing.
Note:
If you are using roll paper, all four sides can be
borderless, and if you are using a sheet of paper, only
left and right sides can be borderless.
O Auto Expand
Enlarge the size of print data automatically and
print without margins. Enlarged areas that exceed
the paper size will not be printed on the paper.
O Retain Size
Using an application, enlarge your image data to
exceed the paper width and height, to avoid
unprinted areas appearing along the left and right
edges. The printer driver does not enlarge the
image data. Enlarging 3 mm in both the left and
right directions (total of 6 mm) is recommended
by using the application that created the data.
Select this setting if you do not want to change the
ratio of your print data by the printer driver.
User's Guide

Supported media type

The following media sizes are supported for borderless
printing.
Paper width
254 mm/10 inch
300 mm
329 mm/13 inch/Super A3
406 mm/16 inch
432 mm/17 inch
515 mm/B2
594 mm/A1
610 mm/24 inch/Super A1
✽
728 mm/B1
914 mm/36 inch/Super A0
1118 mm/44 inch/Super B0
✽ Epson Stylus Pro 7900/7910 does not support these size.
Depending on the media type, the print quality may
decline or the borderless printing is not supported. See
the following section for detailed information.
See "Paper Information" on page 172
✽
✽
Variety of Printings 137