The Control Panel; Buttons, Lights, And Messages; Buttons - Epson Stylus Pro 7900 User Manual

Epson Stylus Pro 7900/7910/9900/9910

The Control Panel

Buttons, Lights, and
Messages
You can check the ink remaining and printer status on
the control panel.

Buttons

1. Power button ( )
Turns the printer on or off.
2. Pause/Reset button (
O The printer enters the PAUSE state when this
button is pressed in the READY state. To cancel
the pause, select PAUSE CANCEL on the LCD panel.
When selecting JOB CANCEL, it functions as the
Reset button. The printer stops printing and clears
print data in the printer. After clearing the data, it
may take a while to return to the READY state.
O The printer returns to the READY state when this
button is pressed in the Menu mode.
O Clears errors if it is possible.
See "Error messages" on page 90
3. Black Ink Change button (
Switches the black ink types.
See "Changing the Black Ink" on page 61
4. Ink Cover Open button (
Slightly opens the selected ink cover, choosing left or
right side indicated on the display.
User's Guide
)
)
)
5. Paper Source button (
O Selects a paper source and roll paper cut method.
The icon changes by pressing this button.
However, you cannot change the paper source
icon to Sheet when you set the paper while
REMAINING PAPER SETUP is set to ON.
Icon Explanation
Roll Auto Cut
On
Roll Auto Cut
Off
Sheet
O Returns to the previous level when pressed in the
Menu mode.
O When you print from the printer driver, the
settings you make on the printer driver have
priority over the settings you make on the printer's
control panel.
6. Paper Feed button (
O Feeds the roll paper in the forward
direction.
You can feed 3 m of paper in the forward
direction with one press. If you want to feed the
paper faster in the forward
hold it for 3 seconds. You can feed 20 cm of paper
in the reverse direction with one press.
O If you press these buttons while the paper presser is
released, you can adjust the paper suction in the
paper feed path in 3 stages.
See "Loading cut sheet A3 size or larger / thick
paper" on page 40
O Press the button when setting a single cut sheet
having a thickness under 0.5 mm, the printer starts
paper feeding and then goes to the READY state.
O Feeds the sheet in the forward direction when you
press the button.
O Changes the parameter in the forward
reverse order when selecting a desired
parameter in the Menu mode.
)
Prints on the roll paper.
It cuts the roll paper
automatically after
printing each page.
Prints on the roll paper.
It does not cut the paper
automatically after
printing. You need to
cut the paper with a
cutter manually.
Prints on the sheet.
/ )
or reverse
direction, press and
or
The Control Panel 12