Ejecting Paper; For Roll Paper; For Cut Sheet Media - Epson Stylus Pro 7900 User Manual

Epson Stylus Pro 7900/7910/9900/9910

Ejecting Paper

This section explains how to eject paper after printing.
Note:
When you use the paper basket, see the following
section.
"Using the paper basket and paper guides" on page
43
When you use optional Auto Take-up Reel Unit, see the
following section.
"Using Auto Take-up Reel Unit (For Epson Stylus
Pro 9900/9910 only)" on page 47

For roll paper

See the following section to cut the roll paper.
"Cutting the roll paper" on page 36

For cut sheet media

A
When printing is complete, the printer supports
the printed media, and PAPER OUT. LOAD
PAPER is displayed on the LCD panel.
If READY appears on the LCD panel, press the
button to feed the paper.
Caution:
c
Do not press any buttons when the Power
light or the Pause light is flashing.
User's Guide
B
Press the
c
button to remove the paper.
Caution:
The paper may fall after ejecting. Be sure
to hold the paper to avoid falling and
damaging the paper.
Paper Handling 42