Installing A Disc - MacDon R85 Operator's Manual

Installing a Disc

CAUTION
Exercise caution when working around the blades.
Blades are sharp and can cause serious injury.
Wear gloves when handling blades.
1. Position new disc on spindle ensuring it is 90° to the
adjacent discs.
2. Install cover (B) and secure with four bolts (A).
Tighten bolts.
3. Reinstall previously removed rotary deflector (if
applicable). See Section
• Installing the Driveline Deflector, page 131
• Installing the Driven Deflector, page 130
4. Close cutterbar door(s). See Section
Doors, page 30.
169455
MAINTENANCE AND SERVICING
5.5 Cutterbar
120
Figure 7.25
Figure 7.26
Rev. E