A.12 Printable Area
This section describes the printable areas for roll paper, validation sheets, or checks.
A.12.1 Printable Area for Roll Paper
The figure below shows the printable area for roll paper and required margins on the sides of
the paper.
The TM-J9000/J9100 uses roll paper with these specifications:
Width
Maximum outside roll diameter
Inside diameter of core
Paper thickness
Paper-end and near-end sensors
Rev. E
Figure A-3 Printable area for roll paper
76 mm ± 0.5 mm {3" ± 0.02"}
60 mm {2.36"}
10 mm {0.39"} or more
0.06 to 0.09 mm {0.0026 to 0.0035"}
2 microswitches (neither is adjustable)
TM-J9000/9100 Technical Reference Guide
Specifications A-9