When A Maintenance Call/Service Call Occurs - Epson SC-F6400 Series User Manual

SC-F6400 Series/SC-F6400H Series
Messages
The combination of the IP
address and the subnet mask is
invalid.
For details, see your
documentation.
Recovery Mode

When a Maintenance Call/Service Call Occurs

Error messages
Maintenance Request: Replace Parts
Soon
XXXXXXXX
Maintenance Request: End Of Parts
Service Life
XXXXXXXX
Printer error.
For details, see your documentation.
XXXXXX
User's Guide
Problem Solver
What to do
Make sure you have entered the correct values for the IP address and the default
gateway.
If you do not know the correct values, contact your network administrator.
Firmware update failed, and the printer started in recovery mode. Follow the steps
below to update the firmware again.
1. Connect the computer and the printer with a USB cable (updates cannot be
performed over a network connection when the printer is in recovery mode).
2. Download the latest firmware from the Epson website, and then start the update.
What to do
A part used in the printer is nearing the end of its service life.
Contact your dealer or Epson Support and tell them the maintenance request
code.
You cannot clear the maintenance request until the part is replaced. A printer
error occurs if you continue to use the printer.
Printer errors are displayed in the following situations.
❏
The power cable is not connected securely
❏
An error that cannot be cleared occurs
When a printer error occurs, the printer automatically stops printing. Turn off
the printer, disconnect the power cable from the outlet and from the AC inlet
on the printer, and then reconnect. Turn on the printer again multiple times.
If the same call for service is displayed on the LCD panel, contact your dealer or
Epson Support for assistance. Tell them the call for service code is "XXXXXX".
85