Safety Information - Thermo Scientific EASYpure RoDi Operating Manual

Thermo Scientific

Safety Information

Section 1
Your Thermo Scientific EASYpure™ RoDi has been designed with
function, reliability, and safety in mind. It is the user's responsibility to
install it in conformance with local electrical codes.
This manual contains important operating and safety information. The
user must carefully read and understand the contents of this manual prior
to the use of this equipment. For safe operation, pay attention to Notes,
Cautions, and Warnings throughout the manual.
Water purification technology employs one or more of the following:
chemicals, electrical devices, mercury vapor lamps, steam and heated
vessels. Care should be taken when installing, operating or servicing
Thermo Scientific products. The specific safety notes pertinent to this
product are listed below.
Warnings
To avoid electrical shock:
1. Use a properly grounded electrical outlet of correct voltage and current
handling capacity.
2. Do not mount your EASYpure RoDi directly over equipment that
requires electrical service. Routine maintenance of this unit may
involve water spillage and subsequent electrical shock hazard, if
improperly located.
3. Replace fuses with those of the same type and rating.
4. Do not disassemble water lines or remove cartrdges where spilled water
could contact equipment that requires electrical service. Electrical
shock hazard could result.
5. Power unit Off before plugging in, or unplugging unit.
6. Disconnect from the power supply prior to maintenance and servicing.
EASYpure RoDi 1-1