Control Module (Internal Power Supply) - Pylontech PowerCube-H1 Product Manual

2.2.3 Control Module (internal power supply)

Control Module has two types: internal and external power supply.
Control Module (SC1000A-100S) Front Interface
Power Terminal +/-
To connect battery power cables in series.
Power Switch
Switch the battery system's (control module and high voltage DC power) ON/OFF.
External Power Terminal +/-
Connect battery system with Inverter.
Power Output Switch
To control the high voltage DC power ON/OFF during the System Switch ON. Normally it turns
in ON position, needn't turn it OFF.
12VDC Output Terminal
Power supply for 3
Dry Contact Terminal
Dry Contact Terminal: provided 2 input and 4 output dry contact signal.
Reset
Reset Button: Long press this button to restart the battery system.
ADD
ADD: 6 bit dial switches to manually distribute the communication address of the battery
system. Nether position is OFF, means "0". Upper position is ON, means "1". 1
level control module, with 12VDC cable:
rd
9 / 23
bit to 5 bit is for
st th
17PIHV1101