Instruction For Use; Finger Positioning; Standby Interface - ZKTeco F18 User Manual

F18
3

Instruction for Use

Before getting into the device features and functions, it is recommended to be familiar with the below
fundamentals.

Finger Positioning

Recommended fingers: Index, middle, or ring fingers; avoid using the thumb or pinky, as they are difficult
to accurately press onto the fingerprint reader.
Note: Please use the correct method when pressing your fingers onto the fingerprint reader for
registration and identification. Our company will assume no liability for recognition issues that may result
from incorrect usage of the product. We reserve the right of final interpretation and modification
concerning this point.

Standby Interface

After connecting the power supply, the following standby interface is displayed:
Tap number button to enter the User ID input interface.

When there is no Super Administrator set in the device, tap M/OK to go to the menu.

After adding a Super Administrator on the device, it requires the Super Administrator's verification

before opening the menu functions.
P a g e | 15
Too low
Too close to the edge
Vertical
Copyright©2023 ZKTECO CO., LTD. All rights reserved.
User Manual