Related Manuals for ZKTeco FA50
Summary of Contents for ZKTeco FA50
- Page 1 Installation Guide FA50 Version: 1.0 Due to regular system upgrades and products, ZKTeco could not guarantee exact consistency between the actual product and the written information in this manual.
- Page 2 Operation Instructions 1. The device has two USB plugs, as shown in the below Figure 1-1. Figure 1-1 Figure 1-2 Insert the USB cable "A" of FA50M into the USB port situated on the host’s back, as shown in Figure 1-2. - 1 -...
- Page 3 2. Right-click on My Computer > Properties > Device Manager. As shown in the figure below, if "Imaging devices" and "libusb-win32 Usb Devices" appear, users can continue using the same device. But if "Imaging devices" and "libusb-win32 Usb Devices" did not appear, it means that the device did not get connected appropriately.
-
Page 4: Driver Installation
Steps to Run Demo for the First Time on Windows Driver Installation Double-click and open the "FA50 Demo" file, then click "FA50M InstallDriver" to install the driver, as shown in Figure 2-1. Figure 2-1 - 3 -... - Page 5 On the Installation window, click "Next", as shown in Figure 2-2. Figure 2-2 Then click "Finish" to successfully install the driver. Figure 2-3 - 4 -...
- Page 6 Demo Test Process 1. Double-click and open the "FA50 Demo" file, and then open the Demo Test software, as shown in Figure 3-1. Figure 3-1 2. On the Demo Test software, firstly click "Open" to open the UVC camera. The camera gets opened successfully only if "Camera opened"...
- Page 7 Secondly, as shown in Figure 3-3, click "Open" to open HID, and "HID o p e n e d " w i l l g e t d i s p l aye d, w h i c h m e a n s t h e H I D o p e n e d successfully.
- Page 8 Click "Enroll face" to register face, and if "Enroll face successfully" gets displayed, it means that face registration is successful. Figure 3-5 As shown in Figure 3-6, the software displays the recognized registration ID's username, and thus the recognition process is complete.
- Page 9 To clear the user, click the "Clear User" button, and if " Clear User successfully" gets displayed, it means that the user removal is successful. Figure 3-7 Precautions 1. If the registration gets failed, click "Clear User" to clear the user and register again.
- Page 10 2. When clicking "Open" to open HID, and if "No device found" gets displayed, carry out the following solutions. Insufficient power supply, plug in two USB ports. The driver did not get installed successfully, repeat the steps of the driver installation process. Figure 4-2 - 9 -...
- Page 11 3. Technical Parameters Windows Edition Windows7 Processor Intel® Pentium(R) CPU G3220 @ 3.00GHz 3.00 GHz Supported Operating System Windows , Linux , Android 4.00GB Installed Memory (RAM) System Type 64-bit Operating System - 10 -...
- Page 12 ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town, Dongguan, China. Phone : +86 769 - 82109991 : +86 755 - 89602394 www.zkteco.com Copyright © 2021 ZKTECO CO., LTD. All Rights Reserved.