Access Group Settings - ZKTeco F18 User Manual

F18

Access Group Settings

Grouping is to manage users in groups. Group users' default time zone is set to be the group time zone,
while users can set their personal time zone. Each group can have 3 time periods at most, the user should
verify in any one of the time period to get the access.
By default, newly enrolled users will be added to Access Group 1, but can be moved/added to other access
group.
Select Access Group on the Access Control interface and press M/OK to set the group.
Add a New Group

Select New Group on the Access Groups interface and press M/OK to set the group parameters.
To Enable Holiday Function

Select Include Holidays on the Access Groups interface and press M/OK to turn the access group ON.
Note:
1. When the Holiday function is enabled, the members can gain access only when the time schedules of
access group have included the holiday.
2. If the Holiday function is disabled, the access time of users in an access group will not be affected.
For Example: If Access Group 2 requires to use Holiday Time Schedule 2 on International Worker's Day, to
let users gain access during 10:00 ~ 17:00 (Time Schedule 2) from May 1 to 3.
Operating Method

1. Set Time Period 2 as 10:00 ~ 17:00 from Sunday to Saturday. For the setting method, please refer to
the example of setting Time Zone 2 in
2. Use Time Period 2 for holiday. For method of setting holiday, please refer to
P a g e | 52
9.2 Time Schedule.
Copyright©2023 ZKTECO CO., LTD. All rights reserved.
User Manual
9.3 Holidays.