User Role - ZKTeco F18 User Manual

F18 User Manual
6

User Role

If you need to assign some specific permissions to certain users, you may edit the "User Defined Role"
under the User Role menu.
You may set the permission scope of the custom role (up to 3 roles) and enroller, that is, the permission
scope of the operation menu.
Press M/OK on the initial interface. Select User Role and press M/OK.
Press ▲/▼ to select a User Defined Role on the User Role interface and press M/OK.
Press ▲/▼ to select Enable Defined Role and press M/OK to enable or disable the user-defined role.
Press ▲/▼ to select Name and press M/OK to enter the custom name of the role.
Then, press ▲/▼ to select a Define User Role and press M/OK.
Press ▲/▼ to select rights and press M/OK to turn on or turn off.
During privilege assignment, the Main Menu function names will be displayed on the left and its sub-
menus will be listed on its right.
P a g e | 28 Copyright©2023 ZKTECO CO., LTD. All rights reserved.