Operating Instruction; Abbreviated Operating Procedures - ZKTeco F18I User Manual

Table of Contents

1. Operating Instruction

Step 1: Install the device and power it up.

Step 2: Enroll users by registering his/her fingerprints, passwords or

card. Assign users' security privileges directly on the device.

Step 3: After enrolling users, verify that his/her enrolled fingerprint,

passwords or card is valid.

Step 4: Configure the device communication settings. Then download

the users' newly enrolled information from the device onto the

Attendance Management on the computer. Data can be transmitted via

TCP/IP, RS232, RS485 and USB client or by using a USB flash drive.

Step 5: Modify users' information in the Attendance Management, and

upload this newly information to the device after connected. Then the

users' newly information will be displayed on the screen upon

attendance. (Some models allow directly name edition and other

operation on the device. Therefore, it is no necessary to connect device.)

Step 6: Verify the device displays the correct day and time. Then start to

attendance.

Step7: Download attendance records to the Attendance Management

and statistics them at the end of the month.

- 1 -

Table of Contents

F18