Verification Mode; Fingerprint Verification - ZKTeco F18 User Manual

F18
Note: For the security of the device, it is recommended to register a super administrator the first time
you use the device.

Verification Mode

3.3.1

Fingerprint Verification

1: N Fingerprint Verification Mode

Compares the fingerprint that is being pressed onto the fingerprint reader with all of the fingerprint data
that is stored in the device.
The device enters the fingerprint authentication mode when a user presses his/her finger onto the
fingerprint scanner.
Please follow the correct way to place your finger onto the sensor. For details, please refer to section
Finger Positioning.
Verification is successful:
1: 1 Fingerprint Verification Mode

Compares the fingerprint that is being pressed onto the fingerprint reader with the fingerprints that are
linked to User ID input via the virtual keyboard.
Users may verify their identities with 1:1 verification mode when they cannot gain access with 1: N
authentication method.
Enter the user ID by using keypad on the initial interface. Then press M/OK to enter 1:1 fingerprint
verification mode.
P a g e | 16
Verification is failed:
Copyright©2023 ZKTECO CO., LTD. All rights reserved.
User Manual