Pc Connection; Cloud Server Setting - ZKTeco F18 User Manual

F18

PC Connection

Comm Key facilitates to improve the security of data by setting the communication between the device
and the PC. Once the Comm Key is set, a password is required to connect the device to the PC software.
Select PC Connection on the Comm. interface and press M/OK to configure the communication settings.
Function Description
Function Name
Comm Key The default password is 0 and can be changed.The Comm Key can contain 1-6 digits.
It is the identification number of the device, which ranges between 1 and 254.
Device ID If the communication method is RS232/RS485, you need to input this device ID in
the software communication interface.

Cloud Server Setting

Select Cloud Server Setting on the Comm. interface and press M/OK to connect with the ADMS server.
Function Description
Function Name
Enable
Domain Server Address
Name
Disable Server Address
Domain
Server Port
Name
Enable Proxy Server
P a g e | 32
Descriptions
Once this mode is turned ON, the domain name mode "http://..."
will be used, such as http://www.XYZ.com, while "XYZ" denotes the
domain name.
The IP address of the ADMS server.
Port used by the ADMS server.
The IP address and the port number of the proxy server is set
manually when the proxy is enabled.
Description
Copyright©2023 ZKTECO CO., LTD. All rights reserved.
User Manual