Personalize Settings; Interface Settings - ZKTeco F18 User Manual

F18
9

Personalize Settings

Press M/OK on the initial interface. Select Personalize and press M/OK to customize interface settings,
voice, bell, punch state options, and shortcut key mappings.

Interface Settings

Select User Interface on the Personalize interface and press M/OK to customize the display style of the
main interface.
Function Description
Function Name
Wallpaper It helps to select the main screen wallpaper according to the user preference.
Language
It helps to select the language of the device.
When there is no operation, and the time exceeds the set value, the device
Menu Screen
automatically goes back to the initial interface.
Timeout (s) The function can either be disabled or set the required value between 60 and
99999 seconds.
When there is no operation, and the time exceeds the set value, a slide show is
Idle Time To
displayed. The function can be disabled, or you may set the value between 3 and
Slide Show (s)
999 seconds.
Slide Show It is the time interval in switching between different slide show pictures. The
Interval (s) function can be disabled, or you may set the interval between 3 and 999 seconds.
If the sleep mode is activated, and when there is no operation in the device, then
Idle Time to
the device will enter standby mode.
Sleep (m)
This function can be disabled or set a value within 1-999 minutes.
Main Screen Style The style of the main screen can be selected according to the user preference.
P a g e | 40
Description
Copyright©2023 ZKTECO CO., LTD. All rights reserved.
User Manual