F18
Shortcut Keys Mappings
Users may define shortcut keys for attendance status and functional keys on the main interface. So, on the
main interface, when the shortcut keys are pressed, the corresponding attendance status or the function
interface displays directly.
Select Shortcut Key Mappings on the Personalize interface and press M/OK to set the required shortcut
keys.
On the Shortcut Key Mappings interface, select a required shortcut key and press M/OK to configure
the shortcut key settings.
On the Shortcut Key ("Up Key") interface, select function and press M/OK to set the functional
process of the shortcut key either as punch state key or function key.
If the Shortcut key is defined as a function key (such as New user, All users, etc.), the configuration is
done as shown in the image below.
If the Shortcut key is set as a punch state key (such as check-in, check-out, etc.), then it is required to
set the punch state value (valid value 0~250), name, and switch time.
P a g e
| 44
Copyright©2023 ZKTECO CO., LTD. All rights reserved.
User Manual