Communication Settings; Ethernet Settings - ZKTeco F18 User Manual

F18
7

Communication Settings

Press M/OK on the initial interface. Select COMM. and press M/OK to set the ethernet, serial communication,
PC connection, cloud server, and Wiegand.

Ethernet Settings

When the device needs to communicate with a PC over the Ethernet, you need to configure network
settings and ensure that the device and the PC connect to the same network segment.
Select Ethernet on the Comm. interface and press M/OK to configure the settings.
Function Description
Function Name
IP Address
Subnet Mask
Gateway
DNS
TCP COMM. Port
DHCP
Display in Status Bar
P a g e | 30
The default IP address is 192.168.1.201. It can be modified according to the
network availability.
The default Subnet Mask is 255.255.255.0. It can be modified according to the
network availability.
The default Gateway address is 0.0.0.0. It can be modified according to the
network availability.
The default DNS address is 0.0.0.0. It can be modified according to the
network availability.
The default TCP COMM Port value is 4370. It can be modified according to the
network availability.
Dynamic Host Configuration Protocol dynamically allocates IP addresses for
clients via server.
Toggle to set whether to display the network icon on the status bar.
Descriptions
Copyright©2023 ZKTECO CO., LTD. All rights reserved.
User Manual