Register Fingerprint - ZKTeco F18 User Manual

F18 User Manual
Press ▲/▼ to select User Role and press M/OK.
Note: If the selected user role is the Super Admin, the user must pass the identity authentication to access
the main menu. The authentication is based on the authentication method(s) that the super administrator
has registered. Please refer to "Verification Mode".
5.1.3

Register Fingerprint

Press ▲/▼ select Fingerprint and press M/OK. Select a finger and press M/OK.
Press the same finger on the fingerprint reader three times. Green indicates that the fingerprint was
enrolled successfully.
P a g e | 22 Copyright©2023 ZKTECO CO., LTD. All rights reserved.