Wiegand Output; Card Format Detect Automatically - ZKTeco F18 User Manual

F18
7.5.2

Wiegand Output

Select Wiegand Output on the Wiegand Setup interface and press M/OK
Function Description
Function Name
SRB
Wiegand Format
Wiegand Output
Bits
Failed ID
Site Code
Pulse Width(us)
Pulse Interval(us)
ID Type
7.5.3

Card Format Detect Automatically

Select Card format detect automatically on the Wiegand Setup interface and press M/OK. Swipe a card
to get the card format.
P a g e | 35
When SRB is enabled, the lock is controlled by the SRB to prevent the lock
from opening due to device removal.
Its value can be 26 bits, 34 bits, 36 bits, 37 bits, and 50 bits.
After selecting the required Wiegand format, select the corresponding output bit
digits of the Wiegand format.
If the verification fails, the system will send the failed ID to the device and replace
the card number or personnel ID with the new one.
It is similar to the device ID. The difference is that a site code can be set manually
and is repeatable on a different device. The valid value ranges from 0 to 256 by
default.
The time width represents the changes in the quantity of electric charge with
regular high-frequency capacitance within a specified time.
The time interval between pulses.
Select the ID types as either User ID or card number.
Descriptions
Copyright©2023 ZKTECO CO., LTD. All rights reserved.
User Manual