F18
Note: When the Web server is connected successfully, the main interface will display the
Wiegand Setup
It is used to set the Wiegand input and output parameters.
Select Wiegand Setup on the Comm. interface and press M/OK to set the Wiegand input and output
parameters.
7.5.1
Wiegand Input
Select Wiegand Input on the Wiegand Setup interface and press M/OK
Function Description
Function Name
Wiegand Format
Its value can be 26 bits, 34 bits, 36 bits, 37 bits, and 50 bits.
Wiegand Bits
The number of bits of the Wiegand data.
The value of the pulse width sent by Wiegand is 100 microseconds by default,
Pulse Width (us)
which can be adjusted within the range of 20 to 100 microseconds.
The default value is 1000 microseconds and can be adjusted within the range of
Pulse Interval (us)
200 to 20000 microseconds.
ID Type
Select between the User ID and card number.
P a g e
| 33
Descriptions
Copyright©2023 ZKTECO CO., LTD. All rights reserved.
User Manual
logo.