Time Schedule - ZKTeco F18 User Manual

F18

Time Schedule

Select Time Schedule on the Access Control interface and press M/OK to configure the time settings.
The entire system can define up to 50 Time Periods.

Each time-period represents 10 Time Zones, i.e., 1 week and 3 holidays, and each time zone is a

standard 24 hour period per day and the user can only verify within the valid time-period.
One can set a maximum of 3 time periods for every time zone. The relationship among these time-

periods is "OR". Thus, when the verification time falls in any one of these time-periods, the verification
is valid.
The Time Zone format of each time-period is HH MM-HH MM, which is accurate to minutes according

to the 24-hour clock.
Press number button and then press M/OK to search the required Time Zone and specify the required
Time Zone number (maximum up to 50 zones).
On the selected Time Zone number interface, select the required day (that is Monday, Tuesday, etc.) and
press M/OK to set the time.
Specify the start and the end time, and then press M/OK.
Note:
The door is inaccessible for the whole day when the End Time occurs before the Start Time (such as

23:57~23:56).
It is the time interval for valid access when the End Time occurs after the Start Time (such as

08:00~23:59).
P a g e | 50 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
User Manual