Nortel Meridian Meridian 1 Implementation Manual page 73

Table 15 describes the parameters, from top to bottom, of the Access
Numbers window. Configure all the DNs in this window according to
system configuration.
Table 15
Access Numbers parameters
Item Description
Use a single Enter the single DN to use for accessing all conferences.
access number
Use a list of This field requires a list of DN pairs, because with direct meeting access users
access numbers dial the conference DN and then the chairperson DN to enter the meeting. The
number of DNs defined equals the maximum number of simultaneous
conferences allowed. Configure up to 10 DN pairs.
Define only nine DN pairs for primary or secondary cards in a dual-card set. One DN must
be reserved pair for dual-card meetings (see
Use a list of Delete DNs by clicking on a table cell and pressing the Delete key, which leaves
access numbers the cell empty. DNs that are in use by a future or current conference cannot be
(Continued) deleted; an error message appears when submitting the form.
When upgrading from MICB 2, the system uses the same table. The old DN pairs
appear in the table.
Assistance DN Enter the DN of an operator or attendant. The system dials this DN when the
chairperson in an active conference selects "call assistant" from the TUI or BUI.
TUI DN Enter the DN to access TUI services.
Step 3 – Define First User
This step appears only during a new installation. Use this window to
define a new user for testing the MICB after completing installation. The
user defined here can be deleted, or modified, from the regular User
Administration window.
This window is identical to the "new user" window (see
page
window. The action buttons are the same as in Step 2, except that the
Finish button only appears in the case of a single-card MICB.
Step 4 – Dual Card Meetings
Configure the parameters for a dual-card meeting in this window (see
Figure 30 on page
member of a dual-card set (that is, the configuration type selected in
Step 1 is either "Dual Card – Primary" or "Dual Card – Secondary").
Meridian Integrated Conference Bridge
112), except it includes the Wizard step titles at the top of the
74). This step appears only when the card is a
Page 73 of 208
"Step 4 – Dual Card Meetings" on page
Service Implementation Guide
73).
Figure 54 on