Nortel Meridian Meridian 1 Implementation Manual page 130

Page 130 of 208
Figure 65
Dial-out Authorization dialing example
Note: In BUI, define the same sequence as above, except do not
enter the command code * 0.
If using this feature and Group Call, make sure that the authorization
access code precedes the restricted DNs in the group call list.
All ports mute/unmute toggle
A chairperson can place all conference participants, except the
chairperson, on mute by dialing *10. While on mute, the participants
can listen to the conference. To unmute the participants, the
chairperson dials *10 again. Because there is one command for mute
and unmute, the system announces to the chairperson one of two
possible voice messages: "All participants have been muted" or "All
participants have been unmuted." Only the chairperson hears the
mute/unmute announcement.
Group call-out
Each MICB card supports up to 64 group call-out lists, each with up to
61 telephone numbers. Each telephone number can be up to 31 digits
in length.
553-3001-358 Standard 1.00
(Succession 1000M, Succession 1000, and Meridian 1)
Auth FCC
Auth Access # (Meridian SL-100)
* 0 8 8 8 1 2 3 4
Outdial User's
Command Authcode
* 0 7 7 7 6 1 2 3 4
SPRE + 6
(Meridian 1 only)
Legend
Authorization Feature FCC/Access # = 888
Special Prefix (SPRE) = 777
User's authorization code = 1234
Trunk access code = 9
Desired DN = 0-972-8-9134512
October 2003
9 0 9 7 2 8 9 1 3 4 5 1 2 #
Dial DN
ended by #
9 0 9 7 2 8 9 1 3 4 5 1 2 #
553-AAA0716