TCP/IP connectivity test
Maintenance technicians can use "ping" to test if the LAN connection is
installed and configured properly. Perform a ping test in one of the
following ways (they are equivalent so there is no need to try both):
•
•
CLI command summary
Using CLI commands
The CLI contains menus and submenus. To select a menu option, enter
the appropriate short command or full command at the prompt. When
a menu is selected, use the commands in Table 38 to navigate to other
menus or to display help.
Table 38
Navigating the menus and displaying help
Command
When entering a menu option that has parameters defined, the "Modify,
Save, or Cancel:" command line displays so that the parameters can be
modified, if required.
To modify system parameters and objects, use one or more of the
commands in Table 39 and Table 40.
Table 39
Modifying parameters
Command
M
S
C
Meridian Integrated Conference Bridge
from a computer on the local LAN to the MICB card's IP address
from the CLI (under the SMaint/ directory) to the IP address of a
computer on the local LAN
*
/
?
Result
Modifies one or more parameters.
Saves modified parameters.
Cancels the modification and allows the parameter to keep its previous value.
Result
Returns to the previous menu.
Returns to the top menu level.
Displays help for the commands in the current menu.
Service Implementation Guide
Page 149 of 208