Micb Fault Isolation And Correction - Nortel Meridian Meridian 1 Implementation Manual

Page 152 of 208
Table 41
MICB CLI command summary (Part 2 of 2)
Menu and command
Protected administration:
PA
Port maintenance:
PM
Report Generation:
RG

MICB fault isolation and correction

Alarm clearing procedures for the MICB are the identical to those for
other IPE cards.
Table 42 describes MICB service problems and the test procedures
used to solve these problems.
553-3001-358 Standard 1.00
Items and commands
Password Editor: PS
Edit passwords (see "Appendix A: Password security" on page
Functionality Upgrade: FU
Performs a functionality upgrade.
The system prompts for the number of ports and for the keycode that must
be entered in three rows of eight characters each.
Software Upgrade: SW
Performs a software upgrade.
The system first prompts for the source: upper socket or FTP. If FTP is
entered, the system then prompts for IP address, path to file, login, and
password.
Administrator BUI Reset: AB
Reset passwords to the default (that is, 000000) of all administrators that
use the BUI.
Port Status Display: PS
Displays status of all MICB ports as follows: Idle, Dialing_out, Ringing,
Talking, or Disabled.
Port Disconnect: PD
Disconnect a specific port from the conference.
Meetings Log Browser: ML
Browse the meeting log (see
Log ordering: ORDer_mlog
Prompts for the same parameters (year, month, day) and displays the log
contents sorted by access DN. The advantage is that all records of each
specific conference appear together.
Refer to the following documents for additional information about
how to clear alarms:
• Succession 1000M and Meridian 1 – Large System:
Maintenance (553-3021-500)
•
Succession 1000 – Succession 1000 System: Maintenance
(553-3031-500)
•
Meridian SL-100 – Alarm Clearing Procedures
(555-4031-543)
October 2003
"CLI Meetings Log Report" on page
FOR MORE INFORMATION
193).
169).