Nortel Meridian Meridian 1 Implementation Manual page 136

Page 136 of 208
Adjust the audio volume of a conference
Follow the steps in Procedure 19 to adjust the volume of a conference.
Procedure 19
Adjust the conference audio volume
1
Figure 66
Volume control feature operation
1 = Decrease volume on speak direction
3 = Increase volume on speak direction
4 = Decrease volume on listen direction
6 = Increase volume on listen direction
2 = Restore initial volume level
8 = Restore initial level of all participants
2
3
Help
The chairperson can access a help menu by dialing **. The help menu
is a voice recording of all chairperson command options. The
chairperson can stop the help menu before it finishes by dialing **
again.
553-3001-358 Standard 1.00
Dial *7 to adjust the volume. Figure 66 shows how the keypad operates this
feature.
Decrease
- 9 dB -6 dB -3 dB
Legend
(chairperson only)
When making a selection, the system applies the command, plays a
confirmation tone, and returns the user to the conference.
Each invocation of the command advances one step in the required direction.
To advance more than one step, the whole sequence must be repeated. For
example, to reach the maximum volume in the listen direction, dial:
*76 *76 *76
The menu can be interrupted, so the two-digit sequence can be entered
without waiting for the menu.
This procedure is now complete
October 2003
Increase
Initial
Level
0 +3 dB +6 d B +9 dB
1 2 3
4 5 6
7 8 9
* 0 #
G100082