Nortel Meridian Meridian 1 Implementation Manual page 44

Page 44 of 208
Table 7
LD 23 – Assign the ACD DNs for the MICB card. (Part 2 of 2)
Prompt Response
NCFW xxxx
Note:
Repeat commands in this table for each ACD DN being configured.
Note: The number of DNs defined for each MICB card using direct
meeting access depends on the number of conferences and bridges
specified on the card. A maximum of 10 conferences can be
configured requiring 20 DNs, two for each conference. One DN is for
the conferees to call in (the main DN) and one DN is for the
conference chairperson.
Define Phantom TN blocks
Phantom TNs can be used, instead of ACD DNs, to serve as
chairperson DNs, conferees DNs and TUI DNs.
Enter the definitions for the Phantom TN in LD 10 as follows:
1 The specific TN and DN vary by site.
2 CFXA is the Class of Service (CLS) that enables Call Forwarding.
3 The last four variables in the screen (under FTR) are the main ACD
553-3001-358 Standard 1.00
Description
ACD DN assigned to MICB card.
Those variables are represented by "x" in
DNs in LD 23.
October 2003
Figure 9 on page 45
.