Nortel Meridian Meridian 1 Implementation Manual page 118

Page 118 of 208
Table 28
Group Members table columns (Part 2 of 2)
Column
Checkboxes
Use the Add Members button at the top of the Group Members table
to add a member to the group (see
The right side of the window displays the group's properties for
outcalling retries. These settings apply only to members with the option
"Wait for Confirmation" activated. Table 29 describes these parameters
which are view only. Click on the Modify button to open a window in
which these settings can be changed (see
Table 29
Group Settings Retry parameters
Field
Wait time for
answer
Number of call
attempts
Time interval
between attempts
Add Members – Click on the Add Members button in the Call-Out
Groups Details window to open the Add Members window. Use the Add
Members window to add one or more members to an existing group
(see
553-3001-358 Standard 1.00
Description
Click on a check box to select a member of the group. The Delete button at the
bottom of the window can then be used to delete the group member. Before
deleting the group, the system displays the following dialog box, for example:
"Are you sure you want to delete these five members?"
Description
The number of seconds to wait for the called party to answer when calling
numbers in this group.Time is measured from call origination, so it includes the
dialing and ringing stages. An answer here, refers to the DTMF * keypad press.
Range: 15-90 seconds.
Default: 30 seconds.
The number of times to try each number in case of failure. Value 1 means only
1 attempt, no retries.
Range: 1-3.
Default: 1.
The number of seconds the system waits, before retrying the same number.
Range: 5-30 seconds.
Default: 10.
Figure 59 on page
October 2003
Figure 59 on page
119).
119).
Figure 61 on page 121).