June 2005
Configuring syslog functionality
To configure syslog functionality on your RLC, complete the following steps:
1
Access the Syslog Configuration property sheet.
2
Complete the fields as described in "Syslog Configuration field
descriptions" on page 134.
3
Click on the OK button.
Result: Configuration Manager writes the changes to a temporary file on
the administration PC.
4
Click on the Send button to update the RLC with the new information.
Note: To save changes to the RLC's Flash memory, select Upload
to Flash from the Menu Bar.
Remote Gateway 911x Series Installation and Administration Guide
Changing configuration settings using Configuration Manager
→
Save
133